Datasheet BRT21, BRT22, BRT23 (Vishay) - 7
| Fabricante | Vishay |
| Descripción | Optocoupler, Phototriac Output, Zero Crossing |
| Páginas / Página | 9 / 7 — BRT21, BRT22, BRT23. TECHNICAL INFORMATION. PACKAGE DIMENSIONS. Option 6. … |
| Formato / tamaño de archivo | PDF / 203 Kb |
| Idioma del documento | Inglés |
BRT21, BRT22, BRT23. TECHNICAL INFORMATION. PACKAGE DIMENSIONS. Option 6. Option 7. Option 9. PACKAGE MARKING. Notes
Línea de modelo para esta hoja de datos
Versión de texto del documento
BRT21, BRT22, BRT23
www.vishay.com Vishay Semiconductors 33 Ω 500 µH 1 6 1 6 2 5 22 nF 220 V~ 2 5 22 nF 220 V~ 3 4 3 4 iil410_14 iil410_15 Fig. 14 - Connect a Series Resistor to the Output and Bridge Fig. 15 - Connect a Choke of Low Winding Cap. in Series, Both by a Capacitor e.g., a Ringcore Choke, with Higher Load Currents
TECHNICAL INFORMATION
See Application Note for additional information.
PACKAGE DIMENSIONS
in millimeters pin one ID 3 2 1 6.4 ± 0.1 ISO method A 4 5 6 9.78 ± 0.25 8.6 ± 0.1 7.62 ref. 1 min. 1.27 ± 0.05 0.1755 ± 0.0735 0.30 typ. 3.555 ± 0.255 4° typ. 15° max. 0.84 typ. 0.765 ± 0.255 0.485 ± 0.025 0.84 typ. 2.54 typ. 17222
Option 6 Option 7 Option 9
7.62 typ. 7.62 typ. 10.3 max. 7.62 typ. 0.7 min. 3.5 ± 0.3 4.3 ± 0.3 0.1 ± 0.1 3.6 ± 0.3 0.1 min. 2.55 ± 0.25 8 min. 0.6 min. 10.3 max. 0.6 min. 8 min. 10.16 typ. 20802-57
PACKAGE MARKING
(example) BRT22H V XXXX 68 Fig. 16 - Example of BRT22H-X017
Notes
• XXXX = LMC (lot marking code) • VDE logo is only marked on option 1 parts • Tape and reel suffix (T) is not part of the package marking Rev. 2.1, 21-Jun-2023
7
Document Number: 83690 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com Vishay Semiconductors 33 Ω 500 µH 1 6 1 6 2 5 22 nF 220 V~ 2 5 22 nF 220 V~ 3 4 3 4 iil410_14 iil410_15 Fig. 14 - Connect a Series Resistor to the Output and Bridge Fig. 15 - Connect a Choke of Low Winding Cap. in Series, Both by a Capacitor e.g., a Ringcore Choke, with Higher Load Currents
TECHNICAL INFORMATION
See Application Note for additional information.
PACKAGE DIMENSIONS
in millimeters pin one ID 3 2 1 6.4 ± 0.1 ISO method A 4 5 6 9.78 ± 0.25 8.6 ± 0.1 7.62 ref. 1 min. 1.27 ± 0.05 0.1755 ± 0.0735 0.30 typ. 3.555 ± 0.255 4° typ. 15° max. 0.84 typ. 0.765 ± 0.255 0.485 ± 0.025 0.84 typ. 2.54 typ. 17222
Option 6 Option 7 Option 9
7.62 typ. 7.62 typ. 10.3 max. 7.62 typ. 0.7 min. 3.5 ± 0.3 4.3 ± 0.3 0.1 ± 0.1 3.6 ± 0.3 0.1 min. 2.55 ± 0.25 8 min. 0.6 min. 10.3 max. 0.6 min. 8 min. 10.16 typ. 20802-57
PACKAGE MARKING
(example) BRT22H V XXXX 68 Fig. 16 - Example of BRT22H-X017
Notes
• XXXX = LMC (lot marking code) • VDE logo is only marked on option 1 parts • Tape and reel suffix (T) is not part of the package marking Rev. 2.1, 21-Jun-2023
7
Document Number: 83690 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000