Datasheet MC74VHC02 (ON Semiconductor) - 6

MC74VHC02 PACKAGE DIMENSIONS TSSOP−14
CASE 948G ISSUE B NOTES:
14X REF K
1. DIMENSIONING AND TOLERANCING PER 0.10 (0.004) M T U S V S ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 0.15 (0.006) T U S 3. DIMENSION A DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. MOLD FLASH OR GATE BURRS SHALL NOT
N
EXCEED 0.15 (0.006) PER SIDE. 0.25 (0.010)
14 8
4. DIMENSION B DOES NOT INCLUDE
2X L/2
INTERLEAD FLASH OR PROTRUSION.
M
INTERLEAD FLASH OR PROTRUSION SHALL NOT EXCEED 0.25 (0.010) PER SIDE.
B
5. DIMENSION K DOES NOT INCLUDE
L
DAMBAR PROTRUSION. ALLOWABLE
−U− N PIN 1
DAMBAR PROTRUSION SHALL BE 0.08
IDENT. F
(0.003) TOTAL IN EXCESS OF THE K DIMENSION AT MAXIMUM MATERIAL
1 7
CONDITION.
DETAIL E
6. TERMINAL NUMBERS ARE SHOWN FOR REFERENCE ONLY. 7. DIMENSION A AND B ARE TO BE 0.15 (0.006) T U S
K
DETERMINED AT DATUM PLANE −W−.
A K1 −V− MILLIMETERS INCHES DIM MIN MAX MIN MAX
ÇÇÇ ÉÉÉ
A
4.90 5.10 0.193 0.200
J J1 B
4.30 4.50 0.169 0.177 ÇÇÇ ÉÉÉ
C
−−− 1.20 −−− 0.047
D
0.05 0.15 0.002 0.006
SECTION N−N F
0.50 0.75 0.020 0.030
G
0.65 BSC 0.026 BSC
H
0.50 0.60 0.020 0.024
J
0.09 0.20 0.004 0.008
−W− C J1
0.09 0.16 0.004 0.006
K
0.19 0.30 0.007 0.012 0.10 (0.004)
K1
0.19 0.25 0.007 0.010
L
6.40 BSC 0.252 BSC
−T− SEATING D G H DETAIL E M
0 8 0 8
PLANE SOLDERING FOOTPRINT
7.06 1 0.65 PITCH 14X 14X 0.36 1.26 DIMENSIONS: MILLIMETERS ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT
:
N. American Technical Support
: 800−282−9855 Toll Free
ON Semiconductor Website
:
www.onsemi.com
Literature Distribution Center for ON Semiconductor USA/Canada 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Europe, Middle East and Africa Technical Support: Order Literature
: http://www.onsemi.com/orderlit
Phone
: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Phone: 421 33 790 2910
Fax
: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Japan Customer Focus Center
For additional information, please contact your local
Email
: orderlit@onsemi.com Phone: 81−3−5817−1050 Sales Representative
www.onsemi.com MC74VHC02/D 5