LTC1197/LTC1197L LTC1199/LTC1199L UUWCO VERTER A D ULTIPLEXER CHARACTERISTICSThe ● denotes the specifications which apply over the full operating temperature range, otherwise specifications are at TA = 25 ° C.VCC = 2.7V, VREF = 2.5V (LTC1197L), fCLK = fCLK(MAX) as defined in Recommended Operating Conditions, unless otherwise noted.LTC1197LLTC1199LPARAMETERCONDITIONSMINTYPMAXMINTYPMAXUNITS Offset Error ● ±2 ±2 LSB Linearity Error (Note 3) ● ±1 ±1 LSB Gain Error ● ±4 ±4 LSB No Missing Codes Resolution ● 10 10 Bits Analog Input Range – 0.05V to VCC + 0.05V V Reference Input Range LTC1197L 0.2 VCC + 0.05V V Analog Input Leakage Current (Note 4) ● ±1 ±1 µA UWDYNAMIC ACCURACYVCC = 5V, VREF = 5V, fCLK = fCLK(MAX) as defined in Recommended Operating Conditions, unless otherwise noted.LTC1197LTC1199SYMBOLPARAMETERCONDITIONSMINTYPMAXMINTYPMAXUNITS S/(N + D) Signal-to-Noise Plus 100kHz Input Signal 60 60 dB Distortion Ratio THD Total Harmonic Distortion 100kHz Input Signal – 64 – 64 dB First 5 Harmonics Peak Harmonic or Spurious Noise 100kHz Input Signal – 68 – 68 dB IMD Intermodulation Distortion fIN1 = 97.046kHz, fIN2 = 102.905kHz 2nd Order Terms – 65 – 65 dB 3rd Order Terms – 70 – 70 dB VCC = 2.7V, VREF = 2.5V, fCLK = fCLK(MAX) as defined in Recommended Operating Conditions, unless otherwise noted.LTC1197LLTC1199LSYMBOLPARAMETERCONDITIONSMINTYPMAXMINTYPMAXUNITS S/(N + D) Signal-to-Noise Plus 50kHz Input Signal 58 58 dB Distortion Ratio THD Total Harmonic Distortion 50kHz Input Signal – 60 – 60 dB First 5 Harmonics Peak Harmonic or Spurious Noise 50kHz Input Signal – 63 – 63 dB IMD Intermodulation Distortion fIN1 = 48.5kHz, fIN2 = 51.5kHz 2nd Order Terms – 60 – 60 dB 3rd Order Terms – 65 – 65 dB 4