Datasheet DS4303 (Analog Devices) - 8
| Fabricante | Analog Devices |
| Descripción | Electronically Programmable Voltage Reference |
| Páginas / Página | 8 / 8 — Electronically Programmable Voltage Reference. Layout Considerations. … |
| Formato / tamaño de archivo | PDF / 396 Kb |
| Idioma del documento | Inglés |
Electronically Programmable Voltage Reference. Layout Considerations. Chip Topology. DS4303. Power-Supply Decoupling
Línea de modelo para esta hoja de datos
Versión de texto del documento
Electronically Programmable Voltage Reference Layout Considerations Chip Topology
To prevent an inadvertent programming cycle from TRANSISTOR COUNT: 6001 occurring during power-up, minimize capacitive load- ing on the ADJ pin. A large capacitance on this pin SUBSTRATE CONNECTED TO GROUND could potentially hold ADJ in a low state long enough that a programming cycle is initiated.
DS4303 Power-Supply Decoupling Package Information
To achieve best results, it is highly recommended that For the latest package outline information, go to a decoupling capacitor is used on the IC power-supply
www.maxim-ic.com/DallasPackInfo.
pin. Typical values of decoupling capacitors are 0.01µF or 0.1µF. Use a high-quality, ceramic, surface-mount capacitor, and mount it as close as possible to the VCC and GND pins of the IC to minimize lead inductance.
Revision History
Pages changed at Rev1: 1 Title changes—all pages Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
8 _____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2005 Maxim Integrated Products is a registered trademark of Maxim Integrated Products, Inc. is a registered trademark of Dallas Semiconductor Corporation.
To prevent an inadvertent programming cycle from TRANSISTOR COUNT: 6001 occurring during power-up, minimize capacitive load- ing on the ADJ pin. A large capacitance on this pin SUBSTRATE CONNECTED TO GROUND could potentially hold ADJ in a low state long enough that a programming cycle is initiated.
DS4303 Power-Supply Decoupling Package Information
To achieve best results, it is highly recommended that For the latest package outline information, go to a decoupling capacitor is used on the IC power-supply
www.maxim-ic.com/DallasPackInfo.
pin. Typical values of decoupling capacitors are 0.01µF or 0.1µF. Use a high-quality, ceramic, surface-mount capacitor, and mount it as close as possible to the VCC and GND pins of the IC to minimize lead inductance.
Revision History
Pages changed at Rev1: 1 Title changes—all pages Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
8 _____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2005 Maxim Integrated Products is a registered trademark of Maxim Integrated Products, Inc. is a registered trademark of Dallas Semiconductor Corporation.