Datasheet MAX6100, MAX6101, MAX6102, MAX6103, MAX6104, MAX6105, MAX6106, MAX6107 (Analog Devices)

FabricanteAnalog Devices
DescripciónLow-Cost, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References
Páginas / Página14 / 1 — Low-Cost, Micropower, Low-Dropout,. High-Output-Current, SOT23 Voltage …
Formato / tamaño de archivoPDF / 335 Kb
Idioma del documentoInglés

Low-Cost, Micropower, Low-Dropout,. High-Output-Current, SOT23 Voltage References. MAX6100–MAX6107. General Description

Datasheet MAX6100, MAX6101, MAX6102, MAX6103, MAX6104, MAX6105, MAX6106, MAX6107 Analog Devices

Línea de modelo para esta hoja de datos

Versión de texto del documento

19-1613; Rev 3; 3/02
Low-Cost, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References MAX6100–MAX6107 General Description Features
The MAX6100–MAX6107 are low-cost, low-dropout ♦
Ultra-Small 3-Pin SOT23 Package
(LDO), micropower voltage references. These three-ter- ♦
Low Cost
minal references are available with output voltage options of 1.25V, 1.8V, 2.048V, 2.5V, 3V, 4.096V, 4.5V, and 5V. ♦
No Output Capacitor Required
They feature a proprietary curvature-correction circuit ♦
Stable with Capacitive Loads
and laser-trimmed, thin-film resistors that result in a low temperature coefficient of 75ppm/°C (max) and an initial ♦
Load Regulation (2mA Sink): 8mV/mA (max)
accuracy of ±0.4% (max). These devices are specified
Load Regulation (5mA Source): 0.9mV/mA (max)
over the extended temperature range (-40°C to +85°C). ♦
±0.4% (max) Initial Accuracy
These series-mode voltage references draw only 90µA of ♦
Low 75ppm/°C Temperature Coefficient
supply current and can source 5mA and sink 2mA of load current. Unlike conventional shunt-mode (two-terminal) ♦
125µA (max) Quiescent Supply Current
references that waste supply current and require an ♦
50mV Dropout at 1mA Load Current
external resistor, these devices offer a supply current that is virtually independent of the supply voltage (with only a 4µA/V variation with supply voltage) and do not require an external resistor. Additionally, these internally compen-
Ordering Information
sated devices do not require an external compensation capacitor and are stable with load capacitance.
PIN- TOP
Eliminating the external compensation capacitor saves
PART TEMP RANGE PACKAGE MARK
valuable board area in space-critical applications. Low-
MAX6100
EUR-T -40°C to +85°C 3 SOT23-3 FZID dropout voltage and supply independent, ultra-low sup-
MAX6101
EUR-T -40°C to +85°C 3 SOT23-3 FZGT ply current make these devices ideal for battery-operat-
MAX6102
EUR-T -40°C to +85°C 3 SOT23-3 FZGU ed, high-performance, low-voltage systems.
MAX6103
EUR-T -40°C to +85°C 3 SOT23-3 FZGV The MAX6100–MAX6107 are available in tiny 3-pin
MAX6104
EUR-T -40°C to +85°C 3 SOT23-3 FZGW SOT23 packages.
MAX6105
EUR-T -40°C to +85°C 3 SOT23-3 FZGX
Applications MAX6106
EUR-T -40°C to +85°C 3 SOT23-3 FZJR Portable Battery-Powered Systems
MAX6107
EUR-T -40°C to +85°C 3 SOT23-3 FZMV Notebook Computers
Note:
There is a minimum order increment of 2500 pieces for SOT23 packages. PDAs, GPSs, DMMs Cellular Phones Hard-Disk Drives
Selector Guide OUTPUT INPUT VOLTAGE Typical Operating Circuit PART VOLTAGE (V) RANGE (V)
MAX6100 1.800 2.5 to 12.6 +SUPPLY INPUT (SEE SELECTOR GUIDE) MAX6101 1.250 2.5 to 12.6 MAX6102 2.500 (VOUT + 200mV) to 12.6 IN OUT REFERENCE MAX6103 3.000 (VOUT + 200mV) to 12.6 OUT MAX6100–MAX6107 MAX6104 4.096 (VOUT + 200mV) to 12.6 * MAX6105 5.000 (VOUT + 200mV) to 12.6 MAX6106 2.048 2.5 to 12.6 MAX6107 4.5 (VOUT + 200mV) to 12.6 1µF* GND
Pin Configuration appears at end of data sheet.
*CAPACITORS ARE OPTIONAL.
________________________________________________________________ Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.