Datasheet DS1866 (Maxim) - 3
| Fabricante | Maxim |
| Descripción | Log Trimmer Potentiometer |
| Páginas / Página | 5 / 3 — One Time Programmability (OTP). DS1866 BLOCK DIAGRAM |
| Formato / tamaño de archivo | PDF / 80 Kb |
| Idioma del documento | Inglés |
One Time Programmability (OTP). DS1866 BLOCK DIAGRAM
Línea de modelo para esta hoja de datos
Versión de texto del documento
DS1866
One Time Programmability (OTP).
The DS1866 can be easily used as an OTP device. This can be accomplished by terminating the P0, P1, or P2 to desired logic levels during system manufacturing. On power up, the value of P0, P1, and P2 will then set the wiper position setting of the DS1866.
DS1866 BLOCK DIAGRAM
Figure 1 3 of 5 102199
One Time Programmability (OTP).
The DS1866 can be easily used as an OTP device. This can be accomplished by terminating the P0, P1, or P2 to desired logic levels during system manufacturing. On power up, the value of P0, P1, and P2 will then set the wiper position setting of the DS1866.
DS1866 BLOCK DIAGRAM
Figure 1 3 of 5 102199