Datasheet SiT1881 (SiTime) - 5

PRELIMINARY
SiT1881
Automotive Ultra-Low Power, Low Jitter 32.768 kHz Oscillator
Table 2. Absolute Maximum Ratings
Attempted operation outside the absolute maximum ratings may cause permanent damage to the part. Actual performance of the IC is only guaranteed within the operational specifications, not at absolute maximum ratings.
Parameters Test Conditions Value Unit Continuous Power Supply Voltage Range (VDD)
-0.5 to 3.63 V
Continuous Maximum Operating Temperature Range
125 °C
Short Duration Maximum Operating Temperature Range
≤ 30 minutes 130 °C
Human Body Model (HBM) ESD Protection
JESD22-A114 2000 V
Charge-Device Model (CDM) ESD Protection
JESD22-C101 500 V
Machine Model (MM) ESD Protection
JESD22-A115 200 V
Latch-up Tolerance
JESD78 Compliant
Mechanical Shock Resistance
Mil 883, Method 2002 30,000 g
Mechanical Vibration Resistance
Mil 883, Method 2007 100 g
Max Junction Temperature
130 °C
Storage Temperature
-65 to 150 °C
Table 3. Pin Configuration Pin Symbol I/O Functionality
1 CLK-0 Out Oscillator Clock Output 2 GND Power Supply Ground Connect to Ground 3 NC NC No Connect 4 NC NC No Connect 5 VDD Power Supply Device supply voltage. Under normal operating conditions, VDD does not require external bypass/decoupling capacitor(s). SiT1881 includes on-chip VDD filtering. 6 NC NC No Connect
Table 4. Environmental Compliance Parameter Condition/Test method AEC-Q100 Grade 2
Rev 0.8 Page 5 of 8 Proprietary & Confidential of SiTime