Datasheet SFH610A, SFH6106 (Vishay)
| Fabricante | Vishay |
| Descripción | Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS |
| Páginas / Página | 9 / 1 — SFH610A, SFH6106. Optocoupler, Phototransistor Output, High Reliability, … |
| Formato / tamaño de archivo | PDF / 178 Kb |
| Idioma del documento | Inglés |
SFH610A, SFH6106. Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS. FEATURES. DESCRIPTION. AGENCY APPROVALS
Línea de modelo para esta hoja de datos
Versión de texto del documento
SFH610A, SFH6106
www.vishay.com Vishay Semiconductors
Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS FEATURES
• Good CTR linearity depending on forward current • Isolation test voltage, 5300 VRMS • High collector emitter voltage, VCEO = 70 V • Low saturation voltage • Fast switching times A 1 4 E • Low CTR degradation C 2 3 C • Temperature stable • Low coupling capacitance • End stackable, 0.100" (2.54 mm) spacing • High common mode interference immunity • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
DESCRIPTION AGENCY APPROVALS
The SFH610A and SFH6106 feature a high current transfer • UL1577, file no. E52744 system code H or J, double ratio, low coupling capacitance and high isolation voltage. protection These couplers have a GaAs infrared diode emitter, which • DIN EN 60747-5-5 (VDE 0884) available with option 1 is optically coupled to a silicon planar phototransistor • BSI IEC 60950; IEC 60065 detector, and is incorporated in a plastic DIP-4 or SMD package. • CSA 93751 The coupling devices are designed for signal transmission between two electrically separated circuits. The couplers are end-stackable with 2.54 mm spacing. Creepage and clearance distances of > 8.0 mm are achieved with option 6 and option 8. This version complies with IEC 60950 (DIN VDE 0805) for reinforced insulation up to an operation voltage of 400 V RMS or DC. Specifications subject to change.
ORDERING INFORMATION
DIP-6 Option 6
S F H 6 1 0 x - # X 0 # # T
PART NUMBER CTR PACKAGE OPTION TAPE 10.16 mm 7.62 mm BIN AND REEL Option 7 Option 8 9.27 mm > 0.7 mm
AGENCY CERTIFIED/PACKAGE CTR (%) UL, BSI, CSA 40 to 80 63 to 125 100 to 200 160 to 320 250 to 500
DIP-4 SFH610A-1 SFH610A-2 SFH610A-3 SFH610A-4 SFH610A-5 DIP-4, 400 mil - SFH610A-2X006 SFH610A-3X006 - - SMD-4 SFH6106-1T SFH6106-2T SFH6106-3T SFH6106-4T SFH6106-5T SMD-4, option 7 - - SFH610A-3X007T - - SMD-4, 400 mil, option 8 - - - SFH610A-4X008T -
VDE, UL, BSI, CSA (option 1) 40 to 80 63 to 125 100 to 200 160 to 320 250 to 500
DIP-4 SFH610A-1X001 SFH610A-2X001 SFH610A-3X001 SFH610A-4X001 - DIP-4, 400 mil SFH610A-1X016 - SFH610A-3X016 SFH610A-4X016 - SMD-4 SFH6106-1X001T SFH6106-2X001T SFH6106-3X001T SFH6106-4X001T - SMD-4, 400 mil, option 8 SFH610A-1X018T - - - -
Note
• For additional information on the available options refer to option information Rev. 2.5, 28-Mar-18
1
Document Number: 83666 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com Vishay Semiconductors
Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS FEATURES
• Good CTR linearity depending on forward current • Isolation test voltage, 5300 VRMS • High collector emitter voltage, VCEO = 70 V • Low saturation voltage • Fast switching times A 1 4 E • Low CTR degradation C 2 3 C • Temperature stable • Low coupling capacitance • End stackable, 0.100" (2.54 mm) spacing • High common mode interference immunity • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
DESCRIPTION AGENCY APPROVALS
The SFH610A and SFH6106 feature a high current transfer • UL1577, file no. E52744 system code H or J, double ratio, low coupling capacitance and high isolation voltage. protection These couplers have a GaAs infrared diode emitter, which • DIN EN 60747-5-5 (VDE 0884) available with option 1 is optically coupled to a silicon planar phototransistor • BSI IEC 60950; IEC 60065 detector, and is incorporated in a plastic DIP-4 or SMD package. • CSA 93751 The coupling devices are designed for signal transmission between two electrically separated circuits. The couplers are end-stackable with 2.54 mm spacing. Creepage and clearance distances of > 8.0 mm are achieved with option 6 and option 8. This version complies with IEC 60950 (DIN VDE 0805) for reinforced insulation up to an operation voltage of 400 V RMS or DC. Specifications subject to change.
ORDERING INFORMATION
DIP-6 Option 6
S F H 6 1 0 x - # X 0 # # T
PART NUMBER CTR PACKAGE OPTION TAPE 10.16 mm 7.62 mm BIN AND REEL Option 7 Option 8 9.27 mm > 0.7 mm
AGENCY CERTIFIED/PACKAGE CTR (%) UL, BSI, CSA 40 to 80 63 to 125 100 to 200 160 to 320 250 to 500
DIP-4 SFH610A-1 SFH610A-2 SFH610A-3 SFH610A-4 SFH610A-5 DIP-4, 400 mil - SFH610A-2X006 SFH610A-3X006 - - SMD-4 SFH6106-1T SFH6106-2T SFH6106-3T SFH6106-4T SFH6106-5T SMD-4, option 7 - - SFH610A-3X007T - - SMD-4, 400 mil, option 8 - - - SFH610A-4X008T -
VDE, UL, BSI, CSA (option 1) 40 to 80 63 to 125 100 to 200 160 to 320 250 to 500
DIP-4 SFH610A-1X001 SFH610A-2X001 SFH610A-3X001 SFH610A-4X001 - DIP-4, 400 mil SFH610A-1X016 - SFH610A-3X016 SFH610A-4X016 - SMD-4 SFH6106-1X001T SFH6106-2X001T SFH6106-3X001T SFH6106-4X001T - SMD-4, 400 mil, option 8 SFH610A-1X018T - - - -
Note
• For additional information on the available options refer to option information Rev. 2.5, 28-Mar-18
1
Document Number: 83666 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000