Datasheet HMC463LP5, 463LP5E (Analog Devices) - 6
| Fabricante | Analog Devices |
| Descripción | GaAs pHEMT MMIC LOW NOISE AGC AMPLIFIER, 2 - 20 GHz |
| Páginas / Página | 8 / 6 — HMC463LP5 / 463LP5E. GaAs pHEMT MMIC LOW NOISE. AGC AMPLIFIER, 2 - 20 … |
| Formato / tamaño de archivo | PDF / 1.0 Mb |
| Idioma del documento | Inglés |
HMC463LP5 / 463LP5E. GaAs pHEMT MMIC LOW NOISE. AGC AMPLIFIER, 2 - 20 GHz. Pin Descriptions. 7 - 6
Línea de modelo para esta hoja de datos
Versión de texto del documento
HMC463LP5 / 463LP5E
v09.0717
GaAs pHEMT MMIC LOW NOISE AGC AMPLIFIER, 2 - 20 GHz
7
Pin Descriptions
Pin Number Function Description Interface Schematic T 1, 3, 4, 6-14, The pins are not connected internally; however, all data 16-20, 22-29, N/C shown herein was measured with these pins connected to M 31, 32 RF/DC ground externally. E - S Optional gate control if AGC is required. IS 2 Vgg2 Leave Vgg2 open circuited if AGC is not required. Typical Vgg2 = -1.5V to 0V O W N 5 RFIN This pad is AC coupled and matched to 50 Ohms O S - L 15 Vgg1 Gate control for amplifier. Adjust to achieve Idd = 60mA. R IE 21 RFOUT This pad is AC coupled and matched to 50 Ohms LIF P M Power supply voltage for the amplifier. 30 Vdd External bypass capacitors are required A Ground GND Ground paddle must be connected to RF/DC ground. Paddle For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D
7 - 6
v09.0717
GaAs pHEMT MMIC LOW NOISE AGC AMPLIFIER, 2 - 20 GHz
7
Pin Descriptions
Pin Number Function Description Interface Schematic T 1, 3, 4, 6-14, The pins are not connected internally; however, all data 16-20, 22-29, N/C shown herein was measured with these pins connected to M 31, 32 RF/DC ground externally. E - S Optional gate control if AGC is required. IS 2 Vgg2 Leave Vgg2 open circuited if AGC is not required. Typical Vgg2 = -1.5V to 0V O W N 5 RFIN This pad is AC coupled and matched to 50 Ohms O S - L 15 Vgg1 Gate control for amplifier. Adjust to achieve Idd = 60mA. R IE 21 RFOUT This pad is AC coupled and matched to 50 Ohms LIF P M Power supply voltage for the amplifier. 30 Vdd External bypass capacitors are required A Ground GND Ground paddle must be connected to RF/DC ground. Paddle For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D
7 - 6