STM32WB5MMGIntroduction1Introduction This datasheet provides the ordering information and mechanical device characteristics of the STM32WB5MMG module. This document should be read in conjunction with the Multiprotocol wireless 32-bit MCU Arm®-based Cortex®-M4 with FPU, Bluetooth® 5 and 802.15.4 radio solution (DS11929) and reference manual (RM0434). The reference manual is available from the STMicroelectronics website at www.st.com. For information on the Arm® Cortex® cores, refer to the Cortex® Technical Reference Manual, available from the www.arm.com website Note: Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere. DS13252 - Rev 1page 2/31 Document Outline 1 Introduction 2 Description 3 Available peripherals 4 Pin description 5 Recommendations 5.1 Pin recommendations 5.2 Layout recommendations 5.2.1 STM32WB5MMG placement 5.2.2 Enclosure effects 5.2.3 Ground plane 5.2.4 Sensitive GPIOs 5.2.5 Four layer reference board design 6 Electrical characteristics 6.1 Operating conditions 6.2 Power consumption 6.3 RF characteristics 6.4 Antenna radiation patterns and efficiency 7 Thermal characteristics 8 Solder re-flow recommendation 9 Package information 9.1 SiP-LGA86 package information 9.1.1 Device marking for SiP-LGA86 10 Ordering information 11 Tape and reel packing 12 Certification 12.1 CE certification 12.2 FCC certification 12.3 ISED certification 12.4 JRF certification 12.5 NCC certification 12.6 SRRC certification Revision history Contents List of tables List of figures