Datasheet PLA172P (IXYS) - 6
| Fabricante | IXYS |
| Descripción | 800V Normally-Open Single-Pole 6-Pin OptoMOS Relay |
| Páginas / Página | 6 / 6 — PLA172P. Mechanical Dimensions. PLA172P Package. PCB Land Pattern. … |
| Formato / tamaño de archivo | PDF / 148 Kb |
| Idioma del documento | Inglés |
PLA172P. Mechanical Dimensions. PLA172P Package. PCB Land Pattern. PLA172PTR Tape & Reel
Línea de modelo para esta hoja de datos
Versión de texto del documento
INTEGRATED CIRCUITS DIVISION
PLA172P Mechanical Dimensions PLA172P Package
9.652 ± 0.381 2.741 ± 0.102
PCB Land Pattern
(0.380 ± 0.015) (0.108 ± 0.004) 0 min / 0.305 max 7.620 ± 0.127 (0 min / 0.012 max) (0.300 ± 0.005) 1.70 (0.0669) 6.350 ± 0.127 9.398 ± 0.254 7.620 ± 0.254 0.635 ± 0.254 (0.250 ± 0.005) (0.370 ± 0.010) (0.300 ± 0.010) (0.025 ± 0.010) 8.70 (0.3425) Pin 1 2.540 ± 0.127 0.559 ± 0.076 0.254 ± 0.0127 (0.100 ± 0.005) (0.022 ± 0.003) (0.010 ± 0.0005) (exclusive of plating) 0.75 2.54 2.588 ± 0.025 (0.0255) (0.10) (0.102 ± 0.001) 0.457 ± 0.076 (0.018 ± 0.003) Dimensions 0.864 ± 0.102 mm (0.034 ± 0.004) (inches)
PLA172PTR Tape & Reel
330.2 DIA. (13.00 DIA.) W=16 (0.630) B =10.70 Top Cover 0 (0.421) Tape Thickness 0.102 MAX. (0.004 MAX.) A =10.90 P1=12.00 0 K =3.20 0 (0.429) (0.472) (0.126) Direction of feed K =2.70 1 (0.106) Embossed Carrier NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 Dimensions 2. The tape complies with all “Notes” for constant dimensions mm Embossment listed on page 5 of EIA-481-2 (inches)
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits' Standard Terms and Conditions of Sale, IXYS Integrated Circuits assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits' product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-PLA172P-R02 ©Copyright 2018, IXYS Integrated Circuits OptoMOS® is a registered trademark of IXYS Integrated Circuits All rights reserved. Printed in USA.
6
6/28/2018
PLA172P Mechanical Dimensions PLA172P Package
9.652 ± 0.381 2.741 ± 0.102
PCB Land Pattern
(0.380 ± 0.015) (0.108 ± 0.004) 0 min / 0.305 max 7.620 ± 0.127 (0 min / 0.012 max) (0.300 ± 0.005) 1.70 (0.0669) 6.350 ± 0.127 9.398 ± 0.254 7.620 ± 0.254 0.635 ± 0.254 (0.250 ± 0.005) (0.370 ± 0.010) (0.300 ± 0.010) (0.025 ± 0.010) 8.70 (0.3425) Pin 1 2.540 ± 0.127 0.559 ± 0.076 0.254 ± 0.0127 (0.100 ± 0.005) (0.022 ± 0.003) (0.010 ± 0.0005) (exclusive of plating) 0.75 2.54 2.588 ± 0.025 (0.0255) (0.10) (0.102 ± 0.001) 0.457 ± 0.076 (0.018 ± 0.003) Dimensions 0.864 ± 0.102 mm (0.034 ± 0.004) (inches)
PLA172PTR Tape & Reel
330.2 DIA. (13.00 DIA.) W=16 (0.630) B =10.70 Top Cover 0 (0.421) Tape Thickness 0.102 MAX. (0.004 MAX.) A =10.90 P1=12.00 0 K =3.20 0 (0.429) (0.472) (0.126) Direction of feed K =2.70 1 (0.106) Embossed Carrier NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 Dimensions 2. The tape complies with all “Notes” for constant dimensions mm Embossment listed on page 5 of EIA-481-2 (inches)
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits' Standard Terms and Conditions of Sale, IXYS Integrated Circuits assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits' product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-PLA172P-R02 ©Copyright 2018, IXYS Integrated Circuits OptoMOS® is a registered trademark of IXYS Integrated Circuits All rights reserved. Printed in USA.
6
6/28/2018