LPSA 800 www.vishay.com Vishay Sfernice MECHANICAL SPECIFICATIONSTECHNICAL SPECIFICATIONSMechanical Protection Insulated case UL 94 V-0 800 W at +85 °C Power Rating and bottom case temperature Resistive Element Thick film Thermal Resistance RTH (j - c): 0.112 °C/W Substrate Alumina Temperature Coefficient R 1 : ± 500 ppm/°C End Connections Screws M4 1 < R 10 : ± 300 ppm/°C -55 °C/175 °C StandardTightening Torque 10 < R: ± 150 ppm/°C 2 Nm IEC 60115-1ConnectionsDielectric Strength Tightening Torque Heatsink 2 Nm IEC 60115-1, 1 min, 7 kVRMS or 12 kVRMS Maximum Torque 2.5 Nm 10 mA max.Weight 83 g ± 10 % Lightning test 1.2/50 μs Until 12 kV IEC 61000-4-5Insulation Resistance 104 M Inductance 0.1 μH ENVIRONMENTAL SPECIFICATIONS 100 pC/7 kV Temperature Range -55 °C to 175 °C Partial Discharge 10 pC/5 kV (for LPSA 800 D only)Climatic Category 55/175/56 Other cases: Consult us PERFORMANCETESTSCONDITIONSREQUIREMENTS IEC 60115-1 Momentary Overload 1.5 x Pr/10 s ± (0.5 % + 0.005 ) Umax. UL = 5000 V IEC 60115-1 Load Life ± (0.5 % + 0.05 ) 1000 h (90/30) Pr at 85 °C AEC-Q200 rev. D conditions: High Temperature Exposure MIL-STD-202 method 108 ± (0.5 % + 0.005 ) 1000 h, +125 °C, unpowered AEC-Q200 rev. D conditions: JESD22 method JA-104 Temperature Cycling ± (1 % + 0.005 ) 1000 cycles, -55 °C to +125 °C dwell time -15 min AEC-Q200 rev. D conditions: Biased Humidity MIL-STD-202 method 103 ± (1 % + 0.005 ) 1000 h, +85 °C, 85 % RH AEC-Q200 rev. D conditions: Operational Life MIL-STD-202 method 108 ± (1 % + 0.005 ) 1000 h, 90/30, powered, +25 °C AEC-Q200 rev. D conditions: ESD Human Body Model AEC-Q200-002 ± (0.5 % + 0.005 ) 25 kVAD AEC-Q200 rev. D conditions: MIL-STD-202 method 204 Vibration ± (0.5 % + 0.005 ) 5 g for 20 min, 12 cycles test from 10 Hz to 2000 Hz AEC-Q200 rev. D conditions: MIL-STD-202 method 213 Mechanical Shock ± (0.5 % + 0.005 ) 100 g; 6 ms, 3.75 m/s 3 shocks/direction AEC-Q200 rev. D conditions: Terminal Strength AEC-Q200-006 ± (0.25 % + 0.01 ) 2.27 kg, 60 s Revision: 21-Nov-2019 2 Document Number: 50078 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000