Datasheet TLP2363 (Toshiba) - 5

TLP2363 10. Switching Characteristics (Note) (Unless otherwise specified, Ta = -40 to 105 , VCC = 2.7 to 5.5 V) Test Characteristics Symbol Note Test Condition Min Typ. Max Unit Circuit Propagation delay time (H/L) tpHL (Note 1) Fig. IF = 0 → 7.5 mA, RL = 350 Ω,  44 80 ns 11.1.5 CL = 15 pF Propagation delay time (L/H) tpLH (Note 1) IF = 7.5 → 0 mA, RL = 350 Ω,  41 80 CL = 15 pF Pulse width distortion |tpHL- (Note 1) IF = 7.5 mA, RL = 350 Ω,  3.2 35 tpLH| CL = 15 pF Propagation delay skew tpsk (Note 1), IF = 7.5 mA, RL = 350 Ω, -40  40 (device to device) (Note 2) CL = 15 pF Fall time tf (Note 1) IF = 0 → 7.5 mA, RL = 350 Ω,  7  CL = 15 pF Rise time tr (Note 1) IF = 7.5 → 0 mA, RL = 350 Ω,  23  CL = 15 pF High-level common-mode CMH Fig. VCM = 1000 Vp-p, IF = 0 mA, ±20 ±40  kV/µs transient immunity 11.1.6 VCC = 3.3 V / 5 V, Ta = 25 Low-level common-mode CML VCM = 1000 Vp-p, IF = 7.5 mA, ±20 ±40  transient immunity VCC = 3.3 V / 5 V, Ta = 25 Note: All typical values are at VCC = 5 V, Ta = 25 . Note 1: f = 1 MHz, duty = 50 %, input current tr = tf = 5 ns or less, CL is approximately 15 pF which includes probe and stray wiring capacitance. Note 2: The propagation delay skew, tpsk, is equal to the magnitude of the worst-case difference in tpHL and/or tpLH that will be seen between units at the same given conditions (supply voltage, input current, temperature, etc). ©2019 5 2019-11-07 Toshiba Electronic Devices & Storage Corporation Rev.1.0