Datasheet MAX22513 (Maxim)
| Fabricante | Maxim |
| Descripción | Surge Protected Dual Driver IO-Link Device Transceiver with DC-DC |
| Páginas / Página | 46 / 1 — EVALUATION KIT AVAILABLE. here. MAX22513. Surge Protected Dual Driver … |
| Formato / tamaño de archivo | PDF / 1.3 Mb |
| Idioma del documento | Inglés |
EVALUATION KIT AVAILABLE. here. MAX22513. Surge Protected Dual Driver IO-Link. Device Transceiver with DC-DC. General Description
Línea de modelo para esta hoja de datos
Versión de texto del documento
link to page 45
EVALUATION KIT AVAILABLE
Click
here
for production status of specific part numbers.
MAX22513 Surge Protected Dual Driver IO-Link Device Transceiver with DC-DC General Description Benefits and Features
The MAX22513 dual-channel low power IO-Link device ● High Configurability and Integration Reduces SKU transceiver features a selectable control interface, internal • Configurable C/Q and DO/DI Drivers high-efficiency DC-DC buck regulator, two internal linear • PNP, NPN, and Push-Pull Modes regulators, and integrated surge protection for robust • Individual Slew Rate Control for Drivers communication. The device features low-on resistance • Selectable Driver Current Limit: 50mA to 250mA drivers (C/Q and DO/DI), selectable driver current limits, • Control and Monitoring with I2C or SPI and overcurrent protection to reduce power dissipation in • Half- and Full-Duplex SPI Modes small sensor applications. • Integrated High-Efficiency DC-DC Buck Regulator The DC-DC buck regulator supplies up to 300mA load • Selectable Switching Frequency current and has an adjustable output voltage (from 2.5V • 921kHz (typ) or 1.229MHz (typ) to 12V). Internal linear regulators generate 5V and 3.3V, • 300mA (max) Load supplying up to 50mA of current. • Output Voltage from 2.5V to 12V • Internal 5V and 3.3V Linear Regulators The MAX22513 can be controlled using SPI or I2C • Accurate Oscillator for IO-Link Communication interfaces, providing flexibility for microcontrollers, and extensive control and diagnostic features. Both full- ● Integrated Protection Enables Robust Systems and half-duplex SPI are supported. The internal MCLK • Integrated ±1kV/500Ω Surge Protection oscillator provides a clock source to a microcontroller for • Glitch Filters for Improved Burst Resilience IO-Link communication. • Selectable Overcurrent Configuration • Hot-Plug and Reverse Polarity Protection The MAX22513 features extensive integrated protection • -40°C to +125°C Operating Temperature Range to ensure robust communication in harsh industrial environments. All four IO pins (V ● Optimized for Small Sensor Designs 24, C/Q, DO/DI, and GND), are reverse voltage protected, short circuit protected, and • Low Power Dissipation: feature integrated ±1kV/500Ω surge protection. • 2Ω (typ) On-Resistance for C/Q and DO/DI Drivers The MAX22513 is available in a tiny WLP package • Available in Two Tiny Packages: (4.1mm x 2.1mm) or 28-pin TQFN-EP package (3.5mm • 28-Pin TQFN-EP (3.5mm x 5.5mm) x 5.5mm) and operates over the -40°C to +125°C • WLP (4.1mm x 2.1mm) temperature range.
Applications
● IO-Link Sensor and Actuator Devices
Ordering Information appears at end of data sheet.
● Industrial Sensors 19-100455; Rev 3; 2/19
EVALUATION KIT AVAILABLE
Click
here
for production status of specific part numbers.
MAX22513 Surge Protected Dual Driver IO-Link Device Transceiver with DC-DC General Description Benefits and Features
The MAX22513 dual-channel low power IO-Link device ● High Configurability and Integration Reduces SKU transceiver features a selectable control interface, internal • Configurable C/Q and DO/DI Drivers high-efficiency DC-DC buck regulator, two internal linear • PNP, NPN, and Push-Pull Modes regulators, and integrated surge protection for robust • Individual Slew Rate Control for Drivers communication. The device features low-on resistance • Selectable Driver Current Limit: 50mA to 250mA drivers (C/Q and DO/DI), selectable driver current limits, • Control and Monitoring with I2C or SPI and overcurrent protection to reduce power dissipation in • Half- and Full-Duplex SPI Modes small sensor applications. • Integrated High-Efficiency DC-DC Buck Regulator The DC-DC buck regulator supplies up to 300mA load • Selectable Switching Frequency current and has an adjustable output voltage (from 2.5V • 921kHz (typ) or 1.229MHz (typ) to 12V). Internal linear regulators generate 5V and 3.3V, • 300mA (max) Load supplying up to 50mA of current. • Output Voltage from 2.5V to 12V • Internal 5V and 3.3V Linear Regulators The MAX22513 can be controlled using SPI or I2C • Accurate Oscillator for IO-Link Communication interfaces, providing flexibility for microcontrollers, and extensive control and diagnostic features. Both full- ● Integrated Protection Enables Robust Systems and half-duplex SPI are supported. The internal MCLK • Integrated ±1kV/500Ω Surge Protection oscillator provides a clock source to a microcontroller for • Glitch Filters for Improved Burst Resilience IO-Link communication. • Selectable Overcurrent Configuration • Hot-Plug and Reverse Polarity Protection The MAX22513 features extensive integrated protection • -40°C to +125°C Operating Temperature Range to ensure robust communication in harsh industrial environments. All four IO pins (V ● Optimized for Small Sensor Designs 24, C/Q, DO/DI, and GND), are reverse voltage protected, short circuit protected, and • Low Power Dissipation: feature integrated ±1kV/500Ω surge protection. • 2Ω (typ) On-Resistance for C/Q and DO/DI Drivers The MAX22513 is available in a tiny WLP package • Available in Two Tiny Packages: (4.1mm x 2.1mm) or 28-pin TQFN-EP package (3.5mm • 28-Pin TQFN-EP (3.5mm x 5.5mm) x 5.5mm) and operates over the -40°C to +125°C • WLP (4.1mm x 2.1mm) temperature range.
Applications
● IO-Link Sensor and Actuator Devices
Ordering Information appears at end of data sheet.
● Industrial Sensors 19-100455; Rev 3; 2/19