Datasheet Texas Instruments OPA237UA — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | OPA237 |
| Numero de parte | OPA237UA |
Amplificadores operacionales de un solo suministro MicroAmplifier ™ Series 8-SOIC -40 a 70
Hojas de datos
Single-Supply Operational Amplifiers MicroAmplifier™ Series datasheet
PDF, 1.7 Mb, Revisión: A, Archivo publicado: feb 15, 2007
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | Sí |
Embalaje
| Pin | 8 | 8 |
| Package Type | D | D |
| Industry STD Term | SOIC | SOIC |
| JEDEC Code | R-PDSO-G | R-PDSO-G |
| Package QTY | 75 | 75 |
| Carrier | TUBE | TUBE |
| Device Marking | 237UA | OPA |
| Width (mm) | 3.91 | 3.91 |
| Length (mm) | 4.9 | 4.9 |
| Thickness (mm) | 1.58 | 1.58 |
| Pitch (mm) | 1.27 | 1.27 |
| Max Height (mm) | 1.75 | 1.75 |
| Mechanical Data | Descargar | Descargar |
Paramétricos
| Additional Features | N/A |
| Architecture | Bipolar |
| CMRR(Min) | 80 dB |
| CMRR(Typ) | 90 dB |
| GBW(Typ) | 1.4 MHz |
| Input Bias Current(Max) | 40000 pA |
| Iq per channel(Max) | 0.475 mA |
| Iq per channel(Typ) | 0.2 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 1.3 uV/C |
| Operating Temperature Range | -40 to 70 C |
| Output Current(Typ) | 4.5 mA |
| Package Group | SOIC |
| Package Size: mm2:W x L | 8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG |
| Rail-to-Rail | In to V- |
| Rating | Catalog |
| Slew Rate(Typ) | 0.5 V/us |
| Total Supply Voltage(Max) | 36 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 2.7 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 28 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 0.95 mV |
Plan ecológico
| RoHS | Obediente |
Notas de aplicación
- A solar-powered buck/boost battery chargerPDF, 334 Kb, Archivo publicado: abr 26, 2012
- 2Q 2012 Issue Analog Applications JournalPDF, 2.4 Mb, Archivo publicado: abr 26, 2012
- Precision Absolute Value CircuitsPDF, 100 Kb, Archivo publicado: oct 2, 2000
You can build a precision absolute value circuit using two op amps and two precision resistors. If you use an op amp and an IC difference amplifier no user supplied precision resistors or resistor adjustments are required. Circuits shown are suitable for precision split supply operation and for single-supply operation. When used with a rail-to-rail op amp the single supply circuit can approach a - Tuning in AmplifiersPDF, 44 Kb, Archivo publicado: oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, Archivo publicado: oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, Archivo publicado: oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
Linea modelo
Serie: OPA237 (7)
Clasificación del fabricante
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps