Datasheet Texas Instruments TLV2771CDBVR — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | TLV2771 |
| Numero de parte | TLV2771CDBVR |
Amplificador operacional de salida de riel a riel de alta velocidad de giro de 2.7 V simple 5-SOT-23 0 a 70
Hojas de datos
2.7-V High-Slew-Rate Rail-to-Rail Output Op Amps w/ Shutdown datasheet
PDF, 2.5 Mb, Revisión: G, Archivo publicado: feb 23, 2004
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | Sí |
Embalaje
| Pin | 5 |
| Package Type | DBV |
| Industry STD Term | SOT-23 |
| JEDEC Code | R-PDSO-G |
| Package QTY | 3000 |
| Carrier | LARGE T&R |
| Device Marking | VAMC |
| Width (mm) | 1.6 |
| Length (mm) | 2.9 |
| Thickness (mm) | 1.2 |
| Pitch (mm) | .95 |
| Max Height (mm) | 1.45 |
| Mechanical Data | Descargar |
Paramétricos
| Additional Features | N/A |
| Architecture | CMOS |
| CMRR(Min) | 60 dB |
| CMRR(Typ) | 96 dB |
| GBW(Typ) | 5.1 MHz |
| Input Bias Current(Max) | 60 pA |
| Iq per channel(Max) | 2 mA |
| Iq per channel(Typ) | 1 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 2 uV/C |
| Operating Temperature Range | -40 to 125,0 to 70 C |
| Output Current(Typ) | 40 mA |
| Package Group | SOT-23 |
| Package Size: mm2:W x L | 5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG |
| Rail-to-Rail | In to V-,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 10.5 V/us |
| Total Supply Voltage(Max) | 5.5 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 2.5 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 17 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 2.5 mV |
Plan ecológico
| RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: OPAMPEVM
Universal Operational Amplifier Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- Signal Conditioning Piezoelectric Sensors (Rev. A)PDF, 58 Kb, Revisión: A, Archivo publicado: sept 28, 2000
Piezoelectric elements are used to construct transducers for a vast number of different applications. Piezoelectric materials generate an electrical charge in response to mechanical movement or vice versa produce mechanical movement in response to electrical input. This report discusses the basic concepts of piezoelectric transducers used as sensors and two circuits commonly used for signal cond - TLV277x/TLV277xA EMI Immunity PerformancePDF, 284 Kb, Archivo publicado: dic 20, 2012
- Stability Analysis Of Voltage-Feedback Op Amps Including Compensation Technique (Rev. A)PDF, 197 Kb, Revisión: A, Archivo publicado: marzo 12, 2001
This report presents an analysis of the stability of voltage-feedback operational amplifiers (op amps) using circuit performance as the criteria to attain a successful design. It discusses several compensation techniques for op amps with and without internal compensation. - Conditioning a Switch-mode Power Supply Current Signal Using TI Op AmpsPDF, 61 Kb, Archivo publicado: marzo 23, 2000
The switch-mode power supply primary current is often sensed using a power resistor. Using an op amp to amplify the current-sense signal can reduce cost and improve noise performance and efficiency. This report reviews the advantages of using an op amp circuit and analyzes the design criteria needed to choose the proper op amp. - Use of Rail-to-Rail Operational Amplifiers (Rev. A)PDF, 159 Kb, Revisión: A, Archivo publicado: dic 22, 1999
This application report assists design engineers to understand the functionality and benefits of rail-to-rail operational amplifiers. It shows simplified schematics, functions, and characteristics of the input and output stages. Typical application schematics for rail-to-rail operational amplifiers are also discussed.
Linea modelo
Serie: TLV2771 (14)
Clasificación del fabricante
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps