Datasheet Texas Instruments OPA567AIRHGT — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | OPA567 |
| Numero de parte | OPA567AIRHGT |
E / S de riel a riel, amplificador de potencia de 2 A 12-VQFN -55 a 125
Hojas de datos
Rail-to-Rail I/O, 2A Power Amplifier datasheet
PDF, 826 Kb, Revisión: A, Archivo publicado: sept 20, 2005
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | Sí |
Embalaje
| Pin | 12 | 12 |
| Package Type | RHG | RHG |
| Industry STD Term | VQFN | VQFN |
| JEDEC Code | S-PQFP-N | S-PQFP-N |
| Package QTY | 250 | 250 |
| Carrier | SMALL T&R | SMALL T&R |
| Device Marking | 567AI | OPA |
| Width (mm) | 5 | 5 |
| Length (mm) | 5 | 5 |
| Thickness (mm) | .9 | .9 |
| Pitch (mm) | 1 | 1 |
| Max Height (mm) | 1 | 1 |
| Mechanical Data | Descargar | Descargar |
Paramétricos
| Additional Features | Adj Current Limit,Shutdown |
| Architecture | FET |
| CMRR(Min) | 60 dB |
| CMRR(Typ) | 80 dB |
| GBW(Typ) | 1.2 MHz |
| Input Bias Current(Max) | 10 pA |
| Iq per channel(Max) | 6 mA |
| Iq per channel(Typ) | 3.4 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 1.3 uV/C |
| Operating Temperature Range | -55 to 125 C |
| Output Current(Typ) | 2200 mA |
| Package Group | VQFN |
| Package Size: mm2:W x L | 12VQFN: 25 mm2: 5 x 5(VQFN) PKG |
| Rail-to-Rail | In,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 1.2 V/us |
| Total Supply Voltage(Max) | 5.5 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 2.7 +5V=5, +/-5V=10 |
| Vos (Offset Voltage @ 25C)(Max) | 2 mV |
Plan ecológico
| RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: OPAMPEVM
Universal Operational Amplifier Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- Power Amplifier Stress and Power Handling LimitationsPDF, 55 Kb, Archivo publicado: sept 27, 2000
To achieve reliable power amplifier designs you must consider the stress on the amplifier compared to its power handling limitations. Power handling limits are specified by the Safe Operating Area (SOA) curves of the power amp. Stress on the amplifier depends on amplifier load and signal conditions which can be evaluated with straightforward techniques.
Linea modelo
Serie: OPA567 (4)
- OPA567AIRHGR OPA567AIRHGRG4 OPA567AIRHGT OPA567AIRHGTG4
Clasificación del fabricante
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Power Op Amps