Datasheet Texas Instruments THS4031IDGN — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | THS4031 |
| Numero de parte | THS4031IDGN |
Amplificador de retroalimentación de voltaje de bajo ruido de 100 MHz 8-MSOP-PowerPAD
Hojas de datos
THS403x 100-MHz Low-Noise High-Speed Amplifiers datasheet
PDF, 1.6 Mb, Revisión: H, Archivo publicado: jun 30, 2016
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | Sí |
Embalaje
| Pin | 8 |
| Package Type | DGN |
| Industry STD Term | HVSSOP |
| JEDEC Code | S-PDSO-G |
| Package QTY | 80 |
| Carrier | TUBE |
| Device Marking | ACN |
| Width (mm) | 3 |
| Length (mm) | 3 |
| Thickness (mm) | 1.02 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.1 |
| Mechanical Data | Descargar |
Paramétricos
| 2nd Harmonic | 81 dBc |
| 3rd Harmonic | 81 dBc |
| @ MHz | 1 |
| Acl, min spec gain | 1 V/V |
| Additional Features | N/A |
| Architecture | Bipolar,Voltage FB |
| BW @ Acl | 200 MHz |
| CMRR(Min) | 85 dB |
| CMRR(Typ) | 95 dB |
| GBW(Typ) | 200 MHz |
| Input Bias Current(Max) | 6000000 pA |
| Iq per channel(Max) | 10 mA |
| Iq per channel(Typ) | 8.5 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 2 uV/C |
| Operating Temperature Range | -40 to 85,0 to 70 C |
| Output Current(Typ) | 90 mA |
| Package Group | MSOP-PowerPAD |
| Package Size: mm2:W x L | 8MSOP-PowerPAD: 15 mm2: 4.9 x 3(MSOP-PowerPAD) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 100 V/us |
| Total Supply Voltage(Max) | 30 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 10 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 1.6 nV/rtHz |
| Vn at Flatband(Typ) | 1.6 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 2 mV |
Plan ecológico
| RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: THS4031EVM
THS4031 High Speed Amplifier Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- Accurately measuring ADC driving-circuit settling time (Rev. A)PDF, 107 Kb, Revisión: A, Archivo publicado: mayo 18, 2015
- Low Power Input and Reference Driver Circuit for ADS8318 and ADS8319PDF, 1.5 Mb, Archivo publicado: jun 24, 2009
The one size fits all approach to operational amplifiers is not effective. Every application has its own specific requirements that must be fulfilled. Appropriate selection of the op amp that drives an analog-to-digital converter (ADC) in a low-power application is a critical step. Most available low-power op amps trade off low-power features with other parameters such as bandwidth, settling t - Wideband Complementary Current Output DAC Single-Ended InterfacePDF, 597 Kb, Archivo publicado: jun 21, 2005
High-speed digital-to-analog converters (DACs) most often use a transformer-coupled output stage. In applications where this configuration is not practical, a single op ampdifferential to single-ended stage has often been used. This application note steps through the exact design equations required to achieve gain matching from each output as well as a matched input impedance to each of the DA - Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revisión: A, Archivo publicado: enero 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Linea modelo
Serie: THS4031 (14)
Clasificación del fabricante
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)