Datasheet Texas Instruments OPA659IDRBT — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | OPA659 |
| Numero de parte | OPA659IDRBT |
Amplificador de entrada JFET estable de ganancia unitaria de 650MHz 8-SON -40 a 85
Hojas de datos
OPA659 Wideband, Unity-Gain Stable, JFET-Input Operational Amplifier datasheet
PDF, 1.5 Mb, Revisión: C, Archivo publicado: nov 23, 2015
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | Sí |
Embalaje
| Pin | 8 |
| Package Type | DRB |
| Industry STD Term | VSON |
| JEDEC Code | S-PDSO-N |
| Package QTY | 250 |
| Carrier | SMALL T&R |
| Device Marking | OBFI |
| Width (mm) | 3 |
| Length (mm) | 3 |
| Thickness (mm) | .88 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1 |
| Mechanical Data | Descargar |
Paramétricos
| 2nd Harmonic | 79 dBc |
| 3rd Harmonic | 100 dBc |
| @ MHz | 10 |
| Acl, min spec gain | 2 V/V |
| Additional Features | N/A |
| Architecture | FET,Voltage FB |
| BW @ Acl | 650 MHz |
| CMRR(Min) | 68 dB |
| CMRR(Typ) | 70 dB |
| GBW(Typ) | 650 MHz |
| Input Bias Current(Max) | 50 pA |
| Iq per channel(Max) | 32 mA |
| Iq per channel(Typ) | 30.5 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 10 uV/C |
| Operating Temperature Range | -40 to 85 C |
| Output Current(Typ) | 70 mA |
| Package Group | SON |
| Package Size: mm2:W x L | See datasheet (SON) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 2550 V/us |
| Total Supply Voltage(Max) | 13 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 7 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 8.9 nV/rtHz |
| Vn at Flatband(Typ) | 8.9 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 5 mV |
Plan ecológico
| RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: OPA659EVM
OPA659EVM Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revisión: A, Archivo publicado: enero 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Linea modelo
Serie: OPA659 (4)
- OPA659IDBVR OPA659IDBVT OPA659IDRBR OPA659IDRBT
Clasificación del fabricante
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)