Datasheet LMC660CN - National Semiconductor IC, OP AMP, QUAD CMOS, DIP14, 660 — Ficha de datos

National Semiconductor LMC660CN

Part Number: LMC660CN

Descripción detallada

Manufacturer: National Semiconductor

Description: IC, OP AMP, QUAD CMOS, DIP14, 660

Docket:
LMC660 CMOS Quad Operational Amplifier
August 2000
LMC660 CMOS Quad Operational Amplifier
General Description
The LMC660 CMOS Quad operational amplifier is ideal for operation from a single supply.

It operates from +5V to +15V and features rail-to-rail output swing in addition to an input common-mode range that includes ground. Performance limitations that have plagued CMOS amplifiers in the past are not a problem with this design. Input VOS, drift, and broadband noise as well as voltage gain into realistic loads (2 k and 600) are all equal to or better than widely accepted bipolar equivalents. This chip is built with National's advanced Double-Poly Silicon-Gate CMOS process. See the LMC662 datasheet for a dual CMOS operational amplifier with these same features. Ultra low input bias current: 2 fA Input common-mode range includes V- Operating range from +5V to +15V supply ISS = 375 µA/amplifier; independent of V+ Low distortion: 0.01% at 10 kHz Slew rate: 1.1 V/µs Available in extend

Simulation Model

Specifications:

Amplifier Type: CMOS
Bandwidth: 0.5 MHz
Base Number: 660
Device Marking: LMC660CN
Gain Bandwidth: 1.4 MHz
I/O Type: Rail-Rail Outputs
IC Generic Number: 660
Input Offset Voltage Max: 6.3 mV
Logic Function Number: 660
Mounting Type: Through Hole
Number of Amplifiers: 4
Number of Pins: 14
Op Amp Type: Low Input Bias
Operating Temperature Range: Commercial
Operational Amplifier Features: CMOS
Package / Case: DIP
SVHC: No SVHC (15-Dec-2010)
Slew Rate: 1.1 V/µs
Supply Voltage + Nom: 5 V
Supply Voltage Range: 5 V to 15.5 V

RoHS: Yes

Accessories:

Dow Corning - 2265931
Fischer Elektronik - ICK 14/16 B
Fischer Elektronik - ICK 14/16 L
Fischer Elektronik - WLK 5