Datasheet HY2007 - ILP Electronics AMP, POWER, + PSU, MOSFET 240 W, 2007 — Ficha de datos

Descripción detallada

Manufacturer: ILP Electronics

Description: AMP, POWER, + PSU, MOSFET 240 W, 2007

Download Data Sheet

Docket:
DATA SHEET HY2007 240 WATTS
The ILP HY2007 Power Amplifier is a fully encapsulated high quality power amplifier with Integral Power Supply and heatsink.

Using the latest Lateral MOSFET's ensures a robust amplifier with excellent sonic characteristics. Mounting can be achieved by the use of T-slots in the heatsink and the nuts and bolts provided.
TYPICAL SPECIFICATIONS
Parameter Output Power Frequency Response (-3dB) Total Harmonic Distortion @ 1kHz Signal to Noise Ratio (DIN AUDIO) Slew Rate typical Rise Time Input Sensitivity Input Impedance Damping Factor(4 @ 100Hz) Load Impedance Maximum D.C. rails Size Width x Height x Extrusion Cut Weight Value 300W rms. Max 15Hz - 50kHz 0.005% 100dB 50V/µS 5µS 500mV rms. 100K >400 4 ±60V 190x120x80mm 1490g
· · · · · · · ·

Specifications:

• Amplifier Type: Power
• Bandwidth: 50 kHz
• Base Number: 2007
• Damping Factor: 400
• Dimensions: 80 x 190
• Frequency Response: 15 Hz to 70 kHz
• IC Generic Number: 2007
• Input Impedance: 100 kOhm
• Input Offset Voltage Max: 500mV
• Input Voltage: 500mV
• Load A Impedance: 4 Ohm
• Load B Impedance: 8 Ohm
• Load Impedance Min: 4 Ohm
• Load Impedance: 4 Ohm
• Logic Function Number: 2007
• Loudspeaker Fuse Current @ 4ohm: 5 A
• Mounting Type: Through Hole
• Number of Amplifiers: 1
• Number of Channels: 1
• Number of Pins: 10
• Operating Temperature Range: 0°C to 85°C
• Output Power Pout: 240 W
• Output Power: 240 W
• Package / Case: Rectangular
• Power Rating RMS: 240 W
• Signal to Noise Ratio: 100 dB
• Slew Rate: 50
• Supply Voltage + Nom: 60 V
• Supply Voltage - Nom: 60 V
• Supply Voltage Max: 60 V
• THD + N: 0.005%
• Total Harmonic Distortion: 0.005%

RoHS: Yes