Datasheet HY2003 - ILP Electronics IC, AMP, POWER, + PSU, 60 W, 2003 — Ficha de datos

ILP Electronics HY2003

Part Number: HY2003

Descripción detallada

Manufacturer: ILP Electronics

Description: IC, AMP, POWER, + PSU, 60 W, 2003

Docket:
DATA SHEET HY2003 60 WATTS
The ILP HY2003 Power Amplifier is a fully encapsulated high quality power amplifier with Integral Power Supply and heatsink.

By selecting the appropiate mains transformer and the programming link on the PCB the amplifier can be used with 4 or 8 loads with the automatic adjustment of input sensitivity. Mounting can be achieved by the use of T-slots in the heatsink and the nuts and bolts provided.
TYPICAL SPECIFICATIONS
Parameter Output Power Frequency Response (-3dB) Total Harmonic Distortion @ 1kHz Signal to Noise Ratio (DIN AUDIO) Slew Rate typical Rise Time Input Sensitivity Input Impedance Damping Factor(8 @ 100Hz) Load Impedance (programmable) Maximum D.C. rails (8 load) Size Width x Height x Extrusion Cut Weight Value 75W rms. Max 15Hz - 50kHz 0.005% 100dB 15V/µS 5µS 500mV rms. 100K >400 4 or 8 ±40V 120x115x30mm 360g
· · · · · · · ·

Specifications:

Amplifier Type: Power
Bandwidth: 50 kHz
Base Number: 2003
Damping Factor: 400
Dimensions: 30 x 120
Frequency Response: 15 Hz to 50 kHz
IC Generic Number: 2003
Input Impedance: 100 kOhm
Input Offset Voltage Max: 500mV
Input Voltage: 500mV
Load A Impedance: 4 Ohm
Load B Impedance: 8 Ohm
Load Impedance Min: 4 Ohm
Load Impedance: 4 Ohm
Logic Function Number: 2003
Loudspeaker Fuse Current @ 4ohm: 2.5 A
Loudspeaker Fuse Current @ 8ohm: 2 A
Mounting Type: Through Hole
Number of Amplifiers: 1
Number of Channels: 1
Number of Pins: 11
Operating Temperature Range: 0°C to 85°C
Output Power Pout: 60 W
Output Power: 75 W
Package / Case: Rectangular
Power Rating RMS: 60 W
Signal to Noise Ratio: 100 dB
Slew Rate: 15
Supply Voltage + Nom: 28 V
Supply Voltage - Nom: 28 VAC
Supply Voltage Max: 40 V
THD + N: 0.005%
Total Harmonic Distortion: 0.005%

RoHS: Yes