Datasheet LPC2105FBD48 - NXP 32 bit MCU, ARM7, 128K FLASH, 48LQFP — Ficha de datos

NXP LPC2105FBD48

Part Number: LPC2105FBD48

Descripción detallada

Manufacturer: NXP

Description: 32 bit MCU, ARM7, 128K FLASH, 48LQFP

Docket:
LPC2104/2105/2106
Single-chip 32-bit microcontrollers; 128 kB ISP/IAP flash with 16/32/64 kB RAM
Rev.

07 -- 20 June 2008 Product data sheet
1. General description
The UART are based on a 16/32-bit ARM7TDMI-S CPU with real-time emulation and embedded trace support, together with 128 kB of embedded high speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at maximum clock rate. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty. Due to their tiny size and low power consumption, these microcontrollers are ideal for applications where miniaturization is a key requirement, such as access control and point-of-sale. With a wide range of serial communications interfaces and on-chip SRAM options up to 64 kB, they are very well suited for communication gateways and protocol converters, soft modems, voice recognition and low end imaging, providing

Specifications:

CPU Speed: 60 MHz
Clock Frequency: 60 MHz
Core Size: 32 bit
Flash Memory Size: 128 Kb
IC Generic Number: LPC2105
Interface: I2C, SPI, UART
Memory Type: FLASH
Number of External Interrupts: 3
Number of I/O Lines: 32
Number of PWM Channels: 6
Number of Pins: 48
Number of Timers: 2
Operating Temperature Range: -40°C to +85°C
Oscillator Type: External Only
Package / Case: LQFP
Peripherals: RTC
Program Memory Size: 128 Kb
RAM Size: 32 Kb
SVHC: No SVHC (18-Jun-2010)
Supply Voltage Range: 1.65 V to 1.95 V, 3 V to 3.6 V
Termination Type: SMD

RoHS: Yes