Datasheet LPC2101FBD48 - NXP 16/32 bit ARM7 MCU, 8K FLASH, SMD — Ficha de datos

NXP LPC2101FBD48

Part Number: LPC2101FBD48

Descripción detallada

Manufacturer: NXP

Description: 16/32 bit ARM7 MCU, 8K FLASH, SMD

Docket:
LPC2101/02/03
Single-chip 16-bit/32-bit microcontrollers; 8 kB/16 kB/32 kB flash with ISP/IAP, fast ports and 10-bit ADC
Rev.

04 -- 2 June 2009 Product data sheet
1. General description
The LPC2101/02/03 microcontrollers are based on a 16-bit/32-bit ARM7TDMI-S CPU with real-time emulation that combines the microcontroller with 8 kB, 16 kB or 32 kB of embedded high-speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at the maximum clock rate. For critical performance in interrupt service routines and DSP algorithms, this increases performance up to 30 % over Thumb mode. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty. Due to their tiny size and low power consumption, the LPC2101/02/03 are ideal for applications where miniaturization is a key requirement. A blend of serial communications interfaces ranging from multiple UARTs, SPI to S

Specifications:

CPU Speed: 70 MHz
Clock Frequency: 70 MHz
Core Size: 32 bit
Flash Memory Size: 8 Kb
IC Generic Number: LPC2101
Interface: I2C, SPI, UART
Logic Function Number: 2101
Memory Size: 8 K
Memory Type: FLASH
Number of ADC Inputs: 8
Number of Bits: 16 / 32
Number of External Interrupts: 13
Number of I/O Lines: 32
Number of Inputs: 31
Number of Outputs: 32
Number of PWM Channels: 14
Number of Pins: 48
Number of Timers: 4
Number of bits In Timer: 32
Number of bits in ADC: 10
Operating Temperature Range: -40°C to +85°C
Oscillator Type: External Only
Package / Case: LQFP
Packaging Type: Peel Pack
Peripherals: ADC, RTC
Program Memory Size: 8 Kb
RAM Size: 2 Kb
SVHC: No SVHC (18-Jun-2010)
Serial Comms: UART, SPI, SSP, I2C
Supply Voltage Range: 1.65 V to 1.95 V, 3 V to 3.6 V

RoHS: Yes