Datasheet Bourns PEC11H-4330F-N0024 — Ficha de datos

Features n Push switch optio High detent torque
n High rotational life and switch life
n Metal bushing/shaft
n RoHS compliant* PEC11H Series -11 mm Encoder w/High Detent Force Electrical Characteristics Output.2-bit quadrature code
Closed Circuit Resistance. 100 milliohms maximum
Contact Rating. 10 mA @ 5 VDC
Insulation Resistance.100 megohms @ 250 VDC
Dielectric Withstanding Voltage -Sea Level. 300 VAC minimum
Electrical Travel.Continuous
Contact Bounce (60 RPM).3.0 ms maximum**
RPM (Operating). 60 maximum** Environmental Characteristics Operating Temperature Range. -20 °C to +70 °C (-4 °F to +158 °F)
Storage Temperature Range. -35 °C to +85 °C (-31 °F to +185 °F)
Humidity.MIL-STD-202, Method 103B, Condition A
Vibration.10~55~10 Hz / 1 min. / Amplitude 1.5 mm
Shock. 100 G
Rotational Life. 100,000 cycles minimum
IP Rating.IP 40
Moisture Sensitivity Level.1 Mechanical Characteristics Mechanical Angle.360 ° continuous
Torque Detent.210 ±70 gf-cm (2.0 ± 0.1 oz-in) Mounting. 70 N-cm (6.2 lb-in) maximum
Shaft Strength (Push-Pull).50 N (11.2 lbs)
Weight. 5 gm (0.17 oz) maximum
Terminals. Printed circuit board terminals Soldering Condition Wave Soldering. Sn95.5/Ag2.8/Cu0.7 solder with no-clean flux: 260 °C ±5 °C max. for 3 ± 1 seconds Hand Soldering. Not recommended
Hardware. One flat washer and one mounting nut supplied with each encoder Switch Characteristics Switch Type.Contact Push ON Momentary SPST …