Datasheet Diodes AP22913 — Ficha de datos

Fabricante	Diodes
Serie	AP22913

Interruptor de carga controlada de velocidad de giro simple

Hojas de datos

Vista previa y descarga

PDF, 1.6 Mb, Idioma: en, Archivo subido: oct 30, 2019, Páginas: 17
Single Slew Rate Controlled Load Switch

Extracto del documento

AP22913
SINGLE SLEW RATE CONTROLLED LOAD SWITCH Description Pin Assignments The AP22913 slew rate controlled load switch is a single P-channel
MOSFET power switch designed for high-side load-switching
applications. The MOSFET has a typical RDS(ON) of 54mΩ at 5V (X1WLB0909-4) and a typical RDS(ON) of 84mΩ at 5V (SOT26), allowing (Top View) (Bottom View) NEW PRODUCT increased load current handling capacity with a low forward voltage
drop. The turn-on slew rate of the device is controlled internally. VIN
and VOUT are isolated during OFF state with TRCB (True Reverse
Current Blocking) feature.
The AP22913 load switch is designed to operate from 1.4V to 5.5V,
making it ideal for 1.8V, 2.5V, 3.3V and 5V systems. The typical
quiescent supply current is only 1µA.
X1-WLB0909-4
The AP22913 is available in the wafer level chip scale 4-pin, X1WLB0909-4 0.5mm pitch and standard SOT26 packages.
(Top View) Features Wide Input Voltage Range: 1.4V to 5.5V Low On-Resistance (X1-WLB0909-4):  92mΩ Typical @1.5V  76mΩ Typical @1.8V  56mΩ Typical @3.3V  54mΩ Typical @5.0V VOUT 1 6 VIN GND 2 5 GND ON 3 4 VIN Low On-Resistance (SOT26):
 122mΩ Typical @1.5V  106mΩ Typical @1.8V  86mΩ Typical @3.3V  84mΩ Typical @5.0V SOT26 Applications High DC Current Capability up to 2A Mobile Device and Smart Phones Truly Reverse Current Block (TRCB) Portable Media Devices Discharging Resistor on VOUT When Disabled Wearable Devices Ultra Low Quiescent Current 1µA Advanced Notebook, UMPC and MID Active-High Control Pin Portable Medical Devices  GPS and Navigation Equipment Minimum 1.1V VIH of ON ESD Protection:
 Human Body Model: 2kV  Charged Device Model: 1kV Package:
 X1-WLB0909-4 with Backside Laminate  0.9mm x 0.9mm, 0.5mm Ball Pitch  Standard Green SOT26 Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Notes 3) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen-and Antimony-free, "Green" and
Lead-free.
3. Halogen-and Antimony-free "Green” products are defined as those which contain …

Precios

Descripción detallada

El interruptor de carga controlada de velocidad de respuesta AP22913 es un interruptor de alimentación MOSFET de canal P único diseñado para aplicaciones de conmutación de carga de lado alto.

El MOSFET tiene un RDS (ENCENDIDO) típico de 54mΩ a 5V (X1-WLB0909-4) y un RDS (ENCENDIDO) típico de 84mΩ a 5V (SOT26), lo que permite una mayor capacidad de manejo de corriente de carga con una baja caída de voltaje directo. La velocidad de rotación del dispositivo se controla internamente. VIN y VOUT están aislados durante el estado OFF con la función TRCB (Bloqueo de corriente inversa verdadera).

El interruptor de carga AP22913 está diseñado para operar de 1.4V a 5.5V, lo que lo hace ideal para sistemas de 1.8V, 2.5V, 3.3V y 5V. La corriente de suministro de reposo típica es de solo 1 μA.

El AP22913 está disponible en la escala de chip de nivel de oblea de 4 pines, X1-WLB0909-4, paso de 0.5 mm y paquetes estándar SOT26.

Embalaje

	AP22913CN4-7	AP22913W6-7
N	1	2
Package	X1-WLB0909-4	X1-WLB0909-4

Paramétricos

Parameters / Models	AP22913CN4-7	AP22913W6-7
Maximum Output Current	2 A	2 A
Number of Channels	1	1
Operating Ambient Temperature Range	-40 to 85 °C	-40 to 85 °C
Operating Voltage Range	1.4 to 5.5 V	1.4 to 5.5 V
Output Turn-On Rise Time Typ	660-1400?s	660-1400?s
RDS(ON)	54, 84 mΩ	54, 84 mΩ
Typical Quiescent Current	1 µA	1 µA

Linea modelo

Serie: AP22913 (2)

AP22913CN4-7 AP22913W6-7

Clasificación del fabricante

Power Management > Protected Switches >