MxL7213 Product Brief
Dual 13A or Single 26A Power Module General Description Features The MxL7213 dual step-down power module integrates the
control, drivers, bootstrap diodes, inductors and MOSFETs in
a single package for point-of-load supplies. Operating from
an input voltage range of 4.5V to 18V, the MxL7213 supports
two outputs each with an output voltage range of 0.6V to
5.3V, set by a single external resistor. Just a few input and
output capacitors are required. It supplies either two 13A
outputs, a single 26A or up to100A when paralleled with
additional MxL7213 modules. Attention to thermal design,
component selection and internal construction results in
higher efficiency and extended operating range than devices
with the same industry standard pinout. ■
■
■
■ Dual 13A or single 26A output ■
■ Frequency synchronization ■
■ Supply rail sequencing is supported as well as frequency
synchronization, multiphase operation and output voltage
tracking. Device temperature monitoring is accomplished with
an onboard temperature diode. The peak current mode
architecture provides very fast transient responses to line and
load changes and doesn’t sacrifice stability. ■ …