Datasheet Analog Devices LTC3405AES6-1.5#PBF — Ficha de datos

LTC3405A-1.5/LTC3405A-1.8
1.5V, 1.8V, 1.5MHz, 300mA
Synchronous Step-Down
Regulators in ThinSOT U FEATURES DESCRIPTIO ■ The LTC ®3405A-1.5/LTC3405A-1.8 are high efficiency
monolithic synchronous buck regulators using a constant
frequency, current mode architecture. Supply current
during operation is only 20µA and drops to 1.5V). In this mode, the
efficiency is lower at light loads, but becomes comparable
to Burst Mode operation when the output load exceeds
25mA. The advantage of pulse skipping mode is lower
output ripple and less interference to audio circuitry. 3405a1518fa 6 LTC3405A-1.5/LTC3405A-1.8 U
OPERATIO (Refer to Functional Diagram)
600
VOUT = 1.5V
MAXIMUM OUTPUT CURRENT (mA) When the converter is in Burst Mode operation, the peak
current of the inductor is set to approximately 100mA regardless of the output load. Each burst event can last from
a few cycles at light loads to almost continuously cycling
with short sleep intervals at moderate loads. In between
these burst events, the power MOSFETs and any unneeded
circuitry are turned off, reducing the quiescent current to
20µA. In this sleep state, the load current is being supplied
solely from the output capacitor. As the output voltage
droops, the EA amplifier’s output rises above the sleep …