Datasheet Analog Devices LTC4007EGN#TRPBF — Ficha de datos

LTC4007
4A, High Efficiency,
Standalone Li-Ion Battery Charger
FEATURES DESCRIPTION Complete Charger Controller for 3-or 4-Cell Lithium-Ion Batteries
n High Conversion Efficiency: Up to 96%
n Output Currents Exceeding 4A
n ±0.8% Charging Voltage Accuracy
n Built-In Charge Termination for Li-Ion Batteries
n AC Adapter Current Limiting Maximizes Charge Rate*
n Thermistor Input for Temperature Qualified Charging
n Wide Input Voltage Range: 6V to 28V
n 0.5V Dropout Voltage; Maximum Duty Cycle: 98%
n Programmable Charge Current: ±4% Accuracy
n Indicator Outputs for Charging, C/10 Current Detection,
AC Adapter Present, Low Battery, Input Current
Limiting and Faults
n Charging Current Monitor Output
n Available in a 24-Pin Narrow SSOP Package The LTC®4007 is a complete constant-current/constant-voltage charger controller for 3-or 4-cell lithium-ion batteries.
The PWM controller uses a synchronous, quasi-constant
frequency, constant off-time architecture that will not generate audible noise even when using ceramic capacitors.
Charging current is programmable to ±4% accuracy using
a programming resistor. Charging current can also be monitored as a voltage across the programming resistor. n The output float voltage is pin programmed for cell count
(3 cells or 4 cells) and chemistry (4.2V/4.1V). A timer, …