Datasheet Texas Instruments SN74HC165N — Ficha de datos
Fabricante | Texas Instruments |
Serie | SN74HC165 |
Numero de parte | SN74HC165N |
Registros de desplazamiento de carga paralela de 8 bits 16-PDIP -40 a 125
Hojas de datos
SNx4HC165 8-Bit Parallel-Load Shift Registers datasheet
PDF, 1.2 Mb, Revisión: H, Archivo publicado: dic 30, 2015
Extracto del documento
Precios
Estado
Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
Disponibilidad de muestra del fabricante | No |
Embalaje
Pin | 16 |
Package Type | N |
Industry STD Term | PDIP |
JEDEC Code | R-PDIP-T |
Package QTY | 25 |
Carrier | TUBE |
Device Marking | SN74HC165N |
Width (mm) | 6.35 |
Length (mm) | 19.3 |
Thickness (mm) | 3.9 |
Pitch (mm) | 2.54 |
Max Height (mm) | 5.08 |
Mechanical Data | Descargar |
Paramétricos
3-State Output | No |
F @ Nom Voltage(Max) | 28 Mhz |
ICC @ Nom Voltage(Max) | 0.08 mA |
Operating Temperature Range | -40 to 125 C |
Output Drive (IOL/IOH)(Max) | 5.2/-5.2 mA |
Package Group | PDIP |
Package Size: mm2:W x L | See datasheet (PDIP) PKG |
Rating | Catalog |
Schmitt Trigger | No |
Technology Family | HC |
VCC(Max) | 6 V |
VCC(Min) | 2 V |
Voltage(Nom) | 6 V |
tpd @ Nom Voltage(Max) | 38 ns |
Plan ecológico
RoHS | Obediente |
Pb gratis | Sí |
Notas de aplicación
- HCMOS Design Considerations (Rev. A)PDF, 207 Kb, Revisión: A, Archivo publicado: sept 9, 2002
This document describes a potential problem designers may encounter when using high-speed CMOS (HC) logic devices. There also is a broad range of CMOS-system to non-CMOS-system interfaces that need to be considered. The design engineer inevitably encounters these interfaces. Key considerations for handling these interfaces are also discussed in this book.
Linea modelo
Serie: SN74HC165 (22)
Clasificación del fabricante
- Semiconductors > Logic > Flip-Flop/Latch/Register > Shift Register