Datasheet Texas Instruments OPA548T-1 — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | OPA548 |
| Numero de parte | OPA548T-1 |
Amplificador operacional de alto voltaje, alta corriente, potencia de oscilación de voltaje de salida amplia 7-TO-220 -40 a 85
Hojas de datos
OPA548 High-Voltage, High-Current Operational Amplifier datasheet
PDF, 3.0 Mb, Revisión: C, Archivo publicado: abr 6, 2015
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 7 |
| Package Type | KC |
| Industry STD Term | TO-220 |
| JEDEC Code | R-PSFM-T |
| Package QTY | 50 |
| Carrier | TUBE |
| Device Marking | OPA548T |
| Width (mm) | 8.38 |
| Length (mm) | 10.17 |
| Thickness (mm) | 4.58 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 4.7 |
| Mechanical Data | Descargar |
Paramétricos
| Additional Features | Adj Current Limit,Shutdown |
| Architecture | Bipolar |
| CMRR(Min) | 80 dB |
| CMRR(Typ) | 95 dB |
| GBW(Typ) | 1 MHz |
| Input Bias Current(Max) | 500000 pA |
| Iq per channel(Max) | 20 mA |
| Iq per channel(Typ) | 17 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 30 uV/C |
| Operating Temperature Range | -40 to 85 C |
| Output Current(Typ) | 3000 mA |
| Package Group | TO-220 |
| Package Size: mm2:W x L | See datasheet (TO-220) PKG |
| Rail-to-Rail | In to V- |
| Rating | Catalog |
| Slew Rate(Typ) | 10 V/us |
| Total Supply Voltage(Max) | 60 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 8 +5V=5, +/-5V=10 |
| Vos (Offset Voltage @ 25C)(Max) | 10 mV |
Plan ecológico
| RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: OPAMPEVM
Universal Operational Amplifier Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: OPA548EVM
OPA548 Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- Power Amplifier Stress and Power Handling LimitationsPDF, 55 Kb, Archivo publicado: sept 27, 2000
To achieve reliable power amplifier designs you must consider the stress on the amplifier compared to its power handling limitations. Power handling limits are specified by the Safe Operating Area (SOA) curves of the power amp. Stress on the amplifier depends on amplifier load and signal conditions which can be evaluated with straightforward techniques. - DC MOTOR SPEED CONTROLLER: Control a DC Motor without Tachometer FeedbackPDF, 50 Kb, Archivo publicado: sept 27, 2000
DC motor speed is often regulated with a closed-loop speed controller using tachometer feedback. It is possible, however, to control dc motor speed without tachometer feedback. - MTTF, Failrate, Reliability, and Life TestingPDF, 51 Kb, Archivo publicado: oct 4, 2000
At Burr-Brown, we characterize and qualify the reliability of our devices through high temperature life testing. The results of this testing are quantified with such values as MTTF and failure rate. This information can be very valuable when used for comparative purposes or applied to reliablility calculations. However, this information loses its worth if it is not precisely understood and appropr
Linea modelo
Serie: OPA548 (9)
Clasificación del fabricante
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Power Op Amps
Otros nombres:
OPA548T1, OPA548T 1