Datasheet Texas Instruments HPA00893P — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | SN65LBC184 |
| Numero de parte | HPA00893P |
Transceptor RS-485 con supresión de voltaje transitoria integrada 8-PDIP -40 a 85
Hojas de datos
SNx5LBC184 Differential Transceiver With Transient Voltage Suppression datasheet
PDF, 1.1 Mb, Revisión: I, Archivo publicado: jun 30, 2015
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | Sí |
Embalaje
| Pin | 8 |
| Package Type | P |
| Industry STD Term | PDIP |
| JEDEC Code | R-PDIP-T |
| Package QTY | 50 |
| Carrier | TUBE |
| Device Marking | 65LBC184 |
| Width (mm) | 6.35 |
| Length (mm) | 9.81 |
| Thickness (mm) | 3.9 |
| Pitch (mm) | 2.54 |
| Max Height (mm) | 5.08 |
| Mechanical Data | Descargar |
Paramétricos
| Common Mode Range | -7 to 12 |
| Duplex | Half |
| Fail Safe | Open |
| Fault Protection | -15 to 15 V |
| HBM ESD | 15 kV |
| ICC(Max) | 25 mA |
| IEC 61000-4-2 Contact | 30 +/- kV |
| Isolated | No |
| No. of RX | 1 |
| No. of TX | 1 |
| Number of Nodes | 128 |
| Operating Temperature Range | -40 to 85 C |
| Package Group | PDIP |
| Rating | Catalog |
| Signaling Rate(Max) | 0.25 Mbps |
| Supply Voltage(s)(Nom) | 5 V |
Plan ecológico
| RoHS | Obediente |
| Pb gratis | Sí |
Notas de aplicación
- RS-485 at 230-kbps Over Uncontrolled InterconnectPDF, 408 Kb, Archivo publicado: abr 12, 2004
This application report presents an evaluation of the SN65LBC184, SN65HVD22, and MAX487 transceivers in an uncontrolled impedance interconnection signaling at 230 kbps. The network used for the evaluation was identified as typical of that for building security. - RS-485 for Digital Motor Control ApplicationsPDF, 180 Kb, Archivo publicado: mayo 12, 2003
This application report focuses on the benefits of using RS-485 signaling for motor control and motion control applications. This technology has several benefits for these applications in terms of noise immunity, wide common-mode voltage range, adequate data rate, and multipoint capability. Other applications also use RS-485 signaling to take advantage of these same benefits. Applications such as - RS-485 for E-Meter Applications (Rev. A)PDF, 311 Kb, Revisión: A, Archivo publicado: agosto 6, 2004
This application report discusses the best practices for designing energy meter communication circuits using the RS-485 standard. Component selection and performance tradeoffs are covered with reference to relevant standards such as IEC 61036 and DL/T 645. Reference design details are provided to help energy meter engineers successfully complete their own circuit designs. - The RS-485 Unit Load and Maximum Number of Bus ConnectionsPDF, 197 Kb, Archivo publicado: marzo 15, 2004
The TIA/EIA-485 (RS-485) standard defines a Unit Load and confines bus configurations to 32. This report explains the Unit-Load concept and how it relates to the maximum number of bus connections. Fractional Unit-Load devices, such at the 1/8th Unit-Load SN65HVD21 and SN65HVD06, allow up to 256 devices on a single bus segment.
Linea modelo
Serie: SN65LBC184 (7)
Clasificación del fabricante
- Semiconductors > Interface > RS-485/RS-422