Datasheet Microchip MCP2003-E/SNVAO — Ficha de datos

Not Recommended for New Designs
Please use ATA663211 or MCP2003B MCP2003/4/3A/4A
LIN J2602 Transceiver
Features Description The MCP2003/2003A and MCP2004/2004A are
Compliant with Local Interconnect Network (LIN)
Bus Specifications 1.3, 2.0 and 2.1, and are
Compliant to SAE J2602 Supports Baud Rates up to 20 KbaudпЂ with
LIN Bus Compatible Output Driver 43V Load Dump Protected Very Low/High Electromagnetic Immunity (EMI)
meets Stringent Original Equipment
Manufacturers (OEM) Requirements Very High Electrostatic Discharge (ESD)
Immunity:
->20 kV on VBB (IEC 61000-4-2)
->14 kV on LBUS (IEC 61000-4-2) Very High Immunity to RF Disturbances meets
Stringent OEM Requirements Wide Supply Voltage, 6.0V-27.0V Continuous Extended Temperature Range: -40В°C to +125В°C Interface to PICВ® MCU EUSART and Standard
USARTs LIN Bus Pin:
-Internal pull-up resistor and diode
-Protected against battery shorts
-Protected against loss of ground
-High-current drive Automatic Thermal Shutdown Low-Power mode:
-Receiver monitoring bus and transmitter off
(пЃЂ 5 ВµA) This device provides a bidirectional, half-duplex communication, physical interface to automotive and industrial
LIN systems to meet the LIN Bus Specification
Revision 2.1 and SAE J2602. The device is short-circuit …