Datasheet Intersil HS-26CLV31RH — Ficha de datos

DATASHEET
HS-26CLV31RH, HS-26CLV31EH FN4898
Rev 4.00
May 23, 2013 Radiation Hardened 3.3V Quad Differential Line Drivers Features The Intersil HS-26CLV31RH, HS-26CLV31EH are radiation
hardened 3.3V quad differential line drivers designed for
digital data transmission over balanced lines, in low voltage,
RS-422 protocol applications. CMOS processing assures low
power consumption, high speed, and reliable operation in the
most severe radiation environments. Electrically screened to SMD # 5962-96663 QML qualified per MIL-PRF-38535 requirements 1.2 micron radiation hardened CMOS
-Total dose 300 krad (Si) (max)
-Single event upset LET . 100MeV/mg/cm2)
-Single event latch-up immune The HS-26CLV31RH, HS-26CLV31EH accept CMOS level inputs
and converts them to differential outputs. Enable pins allow
several devices to be connected to the same data source and
addressed independently. These devices have unique outputs that
become high impedance when the driver is disabled or
powered-down, maintaining signal integrity in multi-driver
applications. Extremely low stand-by current . 100ВµA (max) Operating supply range . 3.0V to 3.6V CMOS level inputs .VIH > (0.7) (VDD); VIL < (0.3) (VDD) Specifications for Rad Hard QML devices are controlled by the
Defense Logistics Agency Land and Maritime (DLA). The SMD
numbers listed here must be used when ordering. Differential outputs . VOH > 1.8V; VOL < 0.5V Detailed Electrical Specifications for these devices are
contained in SMD 5962-96663. A “hot-link” is also provided on
our homepage for downloading. Full -55В°C to +125В°C military temperature range High impedance outputs when disabled or powered down Low output impedance . .10пЃ— or less Pb-Free (RoHS Compliant) Applications Line transmitter for MIL-STD-1553 serial data bus Ordering Information
ORDERING NUMBER …