Datasheet Microchip MIC28513-1YFL-TR — Ficha de datos

MIC28513
45V, 4A Synchronous Buck Regulator
Features General Description 4.6V to 45V Operating Input Voltage Supply Up to 4A Output Current Integrated High-Side and Low-Side N-Channel
MOSFETs HyperLight Load (MIC28513-1) and Hyper Speed
Control (MIC28513-2) Architecture Enable Input and Power Good (PGOOD) Output Programmable Current-Limit and Foldback
“Hiccup” Mode Short-Circuit Protection Built-In 5V Regulator for Single-Supply Operation Adjustable 200 kHz to 680 kHz Switching
Frequency Fixed 5 ms Soft-Start Internal Compensation and Thermal Shutdown Thermally-Enhanced 24-Pin 3 mm x 4 mm FQFN
Package –40°C to +125°C Junction Temperature Range The MIC28513 is a synchronous step-down switching
regulator with internal power switches capable of
providing up to 4A output current from a wide input
supply range from 4.6V to 45V. The output voltage is
adjustable down to 0.8V with a guaranteed accuracy of
В±1%. A constant switching frequency can be
programmed from 200 kHz to 680 kHz. The
MIC28513’s Hyper Speed Control® and HyperLight
LoadВ® architectures allow for high VIN (low VOUT)
operation and ultra-fast transient response while
reducing the required output capacitance. The
MIC28513-1’s HyperLight Load architecture also
provides very good light load efficiency.
The MIC28513 offers a full suite of features to ensure
protection under fault conditions. These include
undervoltage lockout to ensure proper operation under …