Datasheet Microchip TC4426 — Ficha de datos

TC4426/TC4427/TC4428
1.5A Dual High-Speed Power MOSFET Drivers
Features: General Description: High Peak Output Current: 1.5A Wide Input Supply Voltage Operating Range:
-4.5V to 18V High Capacitive Load Drive Capability: 1000 pF in
25 ns (typical) Short Delay Times: 40 ns (typical) Matched Rise and Fall Times Low Supply Current:
-With Logic �1’ Input – 4 mA
-With Logic �0’ Input – 400 µA Low Output Impedance: 7 Latch-Up Protected: Withstands 0.5A Reverse
Current Input Withstands Negative Inputs Up to 5V Electrostatic Discharge (ESD) Protected: 2.0 kV Space-saving 8-Pin MSOP and 8-Pin 6x5 DFN-S
Packages The TC4426/TC4427/TC4428 are improved versions
of the earlier TC426/TC427/TC428 family of MOSFET
drivers. The TC4426/TC4427/TC4428 devices have
matched rise and fall times when charging and
discharging the gate of a MOSFET. Applications: These devices are highly latch-up resistant under any
conditions within their power and voltage ratings. They
are not subject to damage when up to 5V of noise
spiking (of either polarity) occurs on the ground pin.
They can accept, without damage or logic upset, up to
500 mA of reverse current (of either polarity) being
forced back into their outputs. All terminals are fully
protected against Electrostatic Discharge (ESD) up to
2.0 kV.
The TC4426/TC4427/TC4428 MOSFET drivers can
easily charge/discharge 1000 pF gate capacitances in …

TC4426AM/TC4427AM/TC4428AM
1.5A Dual High-Speed Power MOSFET Drivers
Features General Description High Peak Output Current: 1.5A Wide Input Supply Voltage Operating Range:
-4.5V to 18V High Capacitive Load Drive Capability:
-1000 pF in 25 ns (typ.) Short Delay Times: 30 ns (typ.) Matched Rise, Fall and Delay Times Low Supply Current:
-With Logic �1’ Input – 1 mA (typ.)
-With Logic �0’ Input – 100 µA (typ.) Low Output Impedance: 7(typ.) Latch-Up Protected: Will Withstand 0.5A Reverse
Current Input: Will Withstand Negative Inputs Up to 5V ESD Protected: 4 kV Pin-compatible with the
TC426M/TC427M/TC428M and
TC4426M/TC4427M/TC4428M Wide Operating Temperature Range:
-55В°C to +125В°C See TC4426A/TC4427A/TC4428A Data Sheet
(DS21423) for additional temperature range and
packaging offerings The TC4426AM/TC4427AM/TC4428AM are improved
versions of the earlier TC4426M/TC4427M/TC4428M
family of MOSFET drivers. In addition to matched rise
and fall times, the TC4426AM/TC4427AM/TC4428AM
devices have matched leading and falling edge
propagation delay times.
These devices are highly latch-up resistant under any
conditions within their power and voltage ratings. They
are not subject to damage when up to 5V of noise
spiking (of either polarity) occurs on the ground pin.
They can accept, without damage or logic upset, up to …

TC4426M/TC4427M/TC4428M
1.5A Dual High-Speed Power MOSFET Drivers
Features General Description High Peak Output Current – 1.5A Wide Input Supply Voltage Operating Range:
-4.5V to 18V High Capacitive Load Drive Capability – 1000 pF
in 25 ns (typ.) Short Delay Times – 40 ns (typ.) Matched Rise and Fall Times Low Supply Current:
-With Logic �1’ Input – 4 mA
-With Logic �0’ Input – 400 µA Low Output Impedance – 7 Latch-Up Protected: Will Withstand 0.5A Reverse
Current Input: Will Withstand Negative Inputs Up to 5V ESD Protected – 4 kV Pin-Compatible with the TC426M/TC427M/
TC428M, TC4426AM/TC4427AM/TC4428AM
Devices Wide Operating Temperature Range:
-55В°C to +125В°C See TC4426/TC4427/TC4428 data sheet
(DS21422) for additional temperature range and
packaging offerings The TC4426M/TC4427M/TC4428M are improved
versions of the earlier TC426M/TC427M/TC428M
family of MOSFET drivers. The TC4426M/TC4427M/
TC4428M devices have matched rise and fall times
when charging and discharging the gate of a MOSFET.
These devices are highly latch-up resistant under any
conditions within their power and voltage ratings. They
are not subject to damage when up to 5V of noise
spiking (of either polarity) occurs on the ground pin.
They can accept, without damage or logic upset, up to
500 mA of reverse current (of either polarity) being …