Datasheet Microchip MCP1404T-E/SO — Ficha de datos

MCP1403/4/5
4.5A Dual High-Speed Power MOSFET Drivers
Features General Description High Peak Output Current: 4.5A (typ.) Low Shoot-Through/Cross-Conduction Current in
Output Stage Wide Input Supply Voltage Operating Range:
-4.5V to 18V High Capacitive Load Drive Capability:
-2200 pF in 15 ns
-5600 pF in 34 ns Short Delay Times: 40 ns (typ.) Low Supply Current:
-With Logic �1’ Input – 1.0 mA (typ.)
-With Logic �0’ Input – 150 µA (typ.) Latch-Up Protected: Will Withstand 1.5A Reverse
Current Logic Input Will Withstand Negative Swing
Up To 5V Packages: 8-Pin SOIC, PDIP, 8-Pin 6x5 DFN,
and 16-Pin SOIC The MCP1403/4/5 are a family of dual-inverting, dualnon-inverting, or complimentary output drivers. They
can delivery high peak currents of 4.5A typically into
capacitive loads. These devices also feature low shootthrough current, matched rise/fall times and
propagation delays. Applications The MCP1403/4/5 drivers operate from a 4.5V to 18V
single power supply and can easily charge and
discharge 2200 pF gate capacitance in under 15 ns
(typ). They provide low enough impedances in both the
on and off states to ensure the MOSFETs intended
state will not be affected, even by large transients. The
input to the MCP1403/4/5 may be driven directly from
either TTL or CMOS (3V to 18V).
The MCP1403/4/5 dual-output 4.5A driver family is …