EVALUATION KIT AVAILABLE MAX22502E 100Mbps Full-Duplex RS-485/RS-422
Transceiver for Long Cables General Description Benefits and Features The MAX22502E full-duplex, ESD-protected, RS-485/
RS-422 transceiver is optimized for high-speed (up to
100Mbps) communication over long cables.This transceiver
features larger receiver hysteresis for high noise rejection
and improved signal integrity. Integrated preemphasis
circuitry extends the distance, and increases the data rate,
of reliable communication by reducing inter-symbol
interference (ISI) caused by long cables when supplied with
5V. Integrated hot-swap protection and a fail-safe receiver
ensure a logic-high on the receiver output when input signals
are shorted or open for longer than 10Ојs (typ).
The MAX22502E is available in a 12-pin TDFN-EP (3mm
x 3mm) package and operates over the -40В°C to +125В°C
ambient temperature range. Applications в—Џв—Џ Motion Control
в—Џв—Џ Encoder Interfaces
в—Џв—Џ Field Bus Networks
в—Џв—Џ Industrial Control Systems в—Џв—Џ High-Speed Operation Over Long Distances Up to 100Mbps Data Rate Integrated Preemphasis Extends Cable Length High Receiver Sensitivity Wide Receiver Bandwidth Symmetrical Receiver Thresholds
в—Џв—Џ Integrated Protection Increases Robustness -15V to +15V Common Mode Range В±15kV ESD Protection (Human Body Model) В±7kV IEC61000-4-2 Air-Gap ESD Protection В±6kV IEC61000-4-2 Contact Discharge
ESD Protection Driver Outputs are Short-Circuit Protected
в—Џв—Џ Flexibility for Many Different Applications 3V to 5.5V Supply Range Low Voltage Logic Supply Down to 1.6V Low 5ВµA (max) Shutdown Current Available in 12-pin TDFN (3mm x 3mm) Package -40В°C to +125В°C Operating Temperature Range
Ordering Information appears at end of data sheet. в—Џв—Џ Backplane Busses Simplified Block Diagram
VL VCC …