Datasheet Intersil ISL8487EIP — Ficha de datos

DATASHEET
ISL8487E, ISL81487L, ISL81487E FN6051
Rev.7.00
February 27, 2006 В±15kV ESD Protected, 1/8 Unit Load, 5V, Low Power, High Speed or Slew Rate
Limited, RS-485/RS-422 Transceivers п‚±15kV ESD Protected, 1/8 Unit Load, 5V,
Low Power, High Speed or Slew Rate
Limited, RS-485/RS-422 Transceivers Features RS-485 I/O Pin ESD Protection В±15kV HBM
-Class 3 ESD Level on all Other Pins >7kV HBM These Intersil RS-485/RS-422 devices are ESD protected,
fractional unit load (UL), BiCMOS, 5V powered, single
transceivers that meet both the RS-485 and RS-422
standards for balanced communication. Each driver output/
receiver input is protected against В±15kV ESD strikes,
without latch-up. Unlike competitive devices, this Intersil
family is specified for 10% tolerance supplies (4.5V to 5.5V). Fractional Unit Load Allows up to 256 Devices on the Bus Specified for 10% Tolerance Supplies High Data Rate Version (ISL81487E) . up to 5Mbps Slew Rate Limited Versions for Error Free Data
Transmission (ISL8487E, ISL81487L) .up to 250kbps Low Current Shutdown Mode (Except ISL81487E) . 0.5A All devices present a 1/8 “unit load” to the RS-485 bus,
which allows up to 256 transceivers on the network for large
node count systems (e.g., process automation, remote
meter reading systems). In a remote utility meter reading
system, individual (apartments for example) utility meter
readings are routed to a concentrator via an RS-485
network, so the high allowed node count minimizes the
number of repeaters required to network all the meters. Data
for all meters is then read out from the concentrator via a …