DATASHEET
EL5174, EL5374 FN7313
Rev 9.00
August 12, 2015 550MHz Differential Twisted-Pair Drivers
The EL5174 and EL5374 are single and triple high bandwidth
amplifiers with an output in differential form. They are
primarily targeted for applications such as driving twisted-pair
lines in component video applications. The inputs can be in
either single-ended or differential form but the outputs are
always in differential form.
On the EL5174 and EL5374, two feedback inputs provide the
user with the ability to set the gain of each device (stable at
minimum gain of one). For a fixed gain of two, please see the
EL5173, EL5373 data sheet (FN7312).
The output common mode level for each channel is set by the
associated REF pin, which has a -3dB bandwidth of over
110MHz. Generally, these pins are grounded but can be tied to
any voltage reference.
All outputs are short circuit protected to withstand temporary
overload condition.
The EL5174 is available in a 8 Ld SOIC package and the EL5374 is
available in a 28 Ld QSOP package. All are specified for operation
over the full -40В°C to +85В°C temperature range. Features Fully differential inputs, outputs, and feedback Differential input range В±2.3V 550MHz 3dB bandwidth 1100V/Вµs slew rate Low distortion at 5MHz Single 5V or dual В±5V supplies 60mA maximum output current Low power -12.5mA per channel Pb-free (RoHS compliant) Applications Twisted-pair driver Differential line driver VGA over twisted-pair ADSL/HDSL driver Single-ended to differential amplification Transmission of analog signals in a noisy environment Pinouts …