Datasheet Microchip MIC2212-PNYML-TR — Ficha de datos

MIC2212 Micrel, Inc. MIC2212
Dual ВµCap LDO and Power-On Reset General Description Features The MIC2212 is a dual ВµCap low dropout regulator with
power-on reset circuit. The п¬Ѓrst regulator is capable of sourcing
150mA, while the second regulator can source up to 300mA
and includes a power-on reset function.
Ideal for battery operated applications, the MIC2212 offers 1%
accuracy, extremely low dropout voltage (80mV @ 100mA),
and extremely low ground current, only 48ВµA total. Equipped
with TTL-logic-compatible enable pins, the MIC2212 can be
put into a zero-off-mode current state, drawing no current
when disabled.
The MIC2212 is a ВµCap design, operating with very small
ceramic output capacitors for stability, reducing required
board space and component cost.
The MIC2212 is available in п¬Ѓxed output voltages in the
10-pin 3mm × 3mm MLF™ leadless package. Input voltage range: 2.25V to 5.5V Stable with ceramic output capacitor 2 LDO outputs Output 1 – 150mA output current Output 2 – 300mA output current Power-on reset function with adjustable delay time Low dropout voltage of 80mV @ 100mA Ultra-low quiescent current of 48µA High output accuracy: +1.0% initial accuracy +2.0% over temperature Thermal shutdown protection Current limit protection Tiny 10-pin 3mm × 3mm MLF™ package Applications Cellular/PCS phones Wireless modems PDAs Typical Application MIC2212-xxBML Li-Ion
Battery VIN VOUT1 VI/O EN1 VOUT2 VCORE EN2 POR CBYP
SET /RST
Baseband
ВµProcessor
COUT = 1ВµF
Ceramic GND Sets del ay for POR MIC2212 Typical Cell Phone Application MicroLeadFrame and MLF are trademarks of Amkor Technology.
Micrel, Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel + 1 (408) 944-0800 fax + 1 (408) 474-1000 http://www.micrel.com February 2006 1 M9999-022106 MIC2212 Micrel, Inc. Ordering Information …