TLX9310
Photocouplers GaAв„“As Infrared LED & Photo IC TLX9310
1. Applications Automotive Battery Management System (BMS) 2. General
The Toshiba TLX9310 consists of a high-output GaAв„“As light-emitting diode coupled with a high-speed photodiode-transistor chip. It is housed in the SO6 package. This photocoupler guarantees operation at up to 125 оЂЊ
and on supplies from 2.7 V to 5.5 V. Since TLX9310 has guaranteed 0.3 mA low supply current (IDDL/IDDH), and
1.0 mA (Topr = 105 оЂЊ) low threshold input current(IFHL), it contributes to energy saving of devices. It can drive
directly from a microcomputer for a low input current. 3. Features
(1) Buffer logic type (totem pole output) (2) Package: SO6 (3) Operating temperature: -40 to 105 оЂЊ (4) Supply voltage: 2.7 to 5.5 V (5) Threshold input current: 1.0 mA (max) (6) Supply current: 0.3 mA (max) (7) Data transfer rate: 5 MBd (typ.) (NRZ) (8) Common-mode transient immunity: В±25 kV/Вµs (min) (9) Isolation voltage: 3750 Vrms (min) (10) AEC-Q101 qualified 4. Packaging and Pin Assignment 1: Anode
3: Cathode
4: GND
5: VO
6: VDD 11-4L1S В©2016 Toshiba Corporation 1 2017-06-30
Rev.3.0 TLX9310
5. Internal Circuit (Note) Note: A 0.1-ВµF bypass capacitor must be connected between pin 6 and pin 4. 6. Principle of Operation
6.1. Truth Table
Input LED Output H ON H L OFF L 6.2. Mechanical Parameters
Characteristics Min Unit Creepage distances 5.0 mm Clearance 5.0 Internal isolation thickness оЂҐ В©2016 Toshiba Corporation 2 2017-06-30
Rev.3.0 TLX9310
7. Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25 оЂЊ)
Characteristics
LED Symbol Input forward current
Input forward current derating (Ta ≥ 85 ) Note Rating Unit IF 8 mA ∆IF/∆Ta -0.05 mA/ Input forward current (pulsed) IFP Input power dissipation PD Input reverse voltage VR 5 V IO 10 mA Output voltage VO 6 V Supply voltage VDD 6 V Detector Output current Output power dissipation
Common Operating temperature …