Datasheet Linear Technology LTC3218EDDB#PBF — Ficha de datos

Fabricante	Linear Technology
Serie	LTC3218
Numero de parte	LTC3218EDDB#PBF

Bomba de carga LED de cámara de un solo cable de 400 mA

Hojas de datos

PDF, 163 Kb, Revisión: B, Archivo subido: sept 27, 2017

Extracto del documento

Precios

Embalaje

Package	3x2 DFN-10
Package Code	DDB
Package Index	05-08-1722

Paramétricos

Demo Boards	DC1030A
Design Tools	LTspice Model
Export Control	no
Frequency	1000 kHz
Ishutdown	1.1 µA
Isupply	0.98 mA
Max Number of LEDs	1
Monolithic	yes
Number of Outputs	1
Operating Temperature Range	0 to 85 °C
Output Current	0.4 A
Synchronous	no
Topology	Charge Pump, LED Driver
Vin Max	4.5 V
Vin Min	2.9 V
Vout Max	5.3 V

Plan ecológico

RoHS

Obediente

Artículos

Descargar
Single-Wire Camera LED Charge Pump Allows Multiple Output Current Levels With Single-Resistor Programmability &mdash LT Journal
PDF, 226 Kb, Archivo publicado: oct 16, 2007
Extracto del documento
DESIGN IDEASвЂ‰L Single-Wire Camera LED Charge
Pump Allows Multiple Output
Current Levels With Single-Resistor
Programmability
by Mohammed H. Jafri
Introduction
time, the LTC3218 features a built-in
timer. This timer shuts down the part
if it has been enabled in flash-mode
(ENF = HIGH) for more than 2 seconds.
The timer is reset by bringing the part
into shutdown and re-enabling it. ENT ILED LOW LOW SHUTDOWN LOW HIGH 1029/RSETT HIGH LOW 2965/RSETF HIGH HIGH 3993/RSETF Linear Technology Magazine October 2007 90 Multiple Current Ratios
LED drivers often use external resistors to program LED current. The LED
current is related to the programming
resistor current through a fixed ratio.
By employing multiple current ratios,
the LTC3218 can be programmed for 80
70
60
50mA
150mA
300mA 50
40 …

Linea modelo

Serie: LTC3218 (3)

LTC3218EDDB#PBF LTC3218EDDB#TRMPBF LTC3218EDDB#TRPBF

Clasificación del fabricante

Power Management > Inductorless (Charge Pump) DC/DC Converters > Inductorless (Charge Pump) LED Drivers

Otros nombres:

LTC3218EDDBPBF, LTC3218EDDB PBF

Contactos