Datasheet Linear Technology LTM4619IV#PBF — Ficha de datos

Hojas de datos

Precios

Embalaje

Paramétricos

Plan ecológico

Notas de Diseño

• Descargar
  Dual uModule DC/DC Regulator Produces High Efficiency 4A Outputs from a 4.5V to 26.5V Input &mdash DN474
  PDF, 215 Kb, Archivo publicado: dic 8, 2009
  Extracto del documento

  Dual ВµModule DC/DC Regulator Produces High Efficiency
  4A Outputs from a 4.5V to 26.5V Input
  Design Note 474
  Alan Chern
  Dual System-in-a-Package Regulator
  Systems and PC boards that use FPGAs and ASICs are
  often very densely populated with components and ICs.
  This dense real estate (especially the supporting circuitry
  for FPGAs, such as DC/DC regulators) puts a burden on
  system designers who aim to simplify layout, improve
  performance and reduce component count. A new family of DC/DC ОјModule В® regulator systems with multiple
  outputs is designed to dramatically reduce the number
  of components and their associated costs. These regulators are designed to eliminate layout errors and to offer
  a ready-made complete solution. Only a few external
  components are needed since the switching controllers, power MOSFETs, inductors, compensation and other support components are all integrated within the compact
  surface mount 15mm Г— 15mm Г— 2.82mm LGA package.
  Such easy layout saves board space and design time by
  implementing high density point-of-load regulators.
  The LTMВ®4619 switching DC/DC ОјModule converter
  regulates two 4A outputs from a single wide 4.5V to
  26.5V input voltage range. Each output can be set between 0.8V and 5V with a single resistor. In fact, only a
  few components are needed to build a complete circuit
  (see Figure 2). …

Artículos

• Descargar
  Dual Output uModule DC/DC Regulator Produces High Efficiency 4A Outputs from a 4.5V to 26.5V Input &mdash LT Journal
  PDF, 277 Kb, Archivo publicado: dic 1, 2009
  Extracto del documento

  DESIGN IDEAS L Dual Output µModule DC/DC
  Regulator Produces High Efficiency
  4A Outputs from a 4.5V to 26.5V Input
  by Alan Chern Dual System-in-a-Package
  Regulator Systems and PC boards that use FPGAs and ASICs are often very densely
  populated with components and ICs.
  This dense real estate (especially the
  supporting circuitry for FPGAs, such
  as DC/DC regulators) puts a burden
  on system designers who aim to simplify layout, improve performance and
  reduce component count. A new family
  of DC/DC ВµModule regulator systems
  with multiple outputs is designed
  to dramatically reduce the number
  of components and their associated
  costs. These regulators are designed
  to eliminate layout errors and to offer
  a ready-made complete solution. Only
  a few external components are needed
  since the switching controllers, power
  MOSFETs, inductors, compensation
  and other support components are all
  integrated within the compact surface …

Linea modelo

Clasificación del fabricante

• Power Management > Switching Regulator > Step-Down (Buck) Regulators > Multiple Output Buck
• µModule Solutions > µModule Regulators > µModule Buck Regulators

Otros nombres:

LTM4619IVPBF, LTM4619IV PBF