Datasheet Linear Technology LTC3883EUH#TRPBF — Ficha de datos

Hojas de datos

Precios

Embalaje

Paramétricos

Plan ecológico

Notas de aplicación

• Descargar
  Accurate Temperature Sensing with an External P-N Junction &mdash AN137
  PDF, 540 Kb, Archivo publicado: sept 20, 2012
  Many Linear Technology devices use an external PNP transistor to sense temperature. Common examples are LTC3880, LTC3883 and LTC2974. Accurate temperature sensing depends on proper PNP selection, layout, and device configuration. This application note reviews the theory of temperature sensing and gives practical advice on implementation.
  Extracto del documento

  Application Note 137
  May 2012
  Accurate Temperature Sensing with an External P-N
  Junction
  Michael Jones
  Introduction Temperature Sensing Theory Many Linear Technology devices use an external PNP
  transistor to sense temperature. Common examples are
  LTC3880, LTC3883 and LTC2974. Accurate temperature
  sensing depends on proper PNP selection, layout, and
  device configuration. This application note reviews the
  theory of temperature sensing and gives practical advice
  on implementation. Linear Technology devices use an external bipolar transistor p-n junction to measure temperature. The relationship
  between forward voltage, current, and temperature is: Why should you worry about implementing temperature
  sensing? Can’t you just put the sensor near your inductor
  and lay out your circuit any way you want? Unfortunately,
  poor routing can sacrifice temperature measurement
  performance and compensation. The purpose of this application note is to allow you the opportunity to get it right
  the first time, so you don’t have to change the layout after
  your board is fabricated.
  Why Use Temperature Sensing?
  Some Linear Technology devices measure internal and
  external temperature. Internal temperature is used to
  protect the device by shutting down operation or locking …

• Descargar
  Overview of the EEPROM in LTC PSM Devices &mdash AN145
  PDF, 3.0 Mb, Archivo publicado: mayo 10, 2014
  Extracto del documento

  Application Note 145
  July 2015
  Overview of the EEPROM in LTC PSM Devices
  Nick Vergunst Introduction convenient List Of All Options Linear TechnologyВ® has a large family of devices that
  provide a great deal of power and configurability for all
  applications. These parts additionally provide onboard
  nonvolatile memory (NVM) in the form of EEPROM to
  store and recall configuration parameters and on some
  devices provide a fault log and user scratch pad. Option 1A. Manual programming with LTpowerPlayв„ў
  Built In Programming Utility (PC->NVM) These Power System Management(PSM) devices’ architectures allow them to power up and load the desired
  configuration parameters from this NVM autonomously
  with no I2C or firmware interaction required.
  A common question customers ask is, “Now that I have
  settled on a particular configuration, how do I program
  this configuration into the chip’s onboard nonvolatile
  memory (NVM).”
  Some available options are presented in rough order of
  increasing complexity throughout the document.
  NOTE: Linear Technology strongly recommends
  Option 1 for preproduction prototyping, and
  OptionВ 2, Option 3 or Option 4 for higher volume
  production. Option 5 is a convenient method to
  program a small quantity of loose ICs prior to board …

• Descargar
  Power System Management Addressing &mdash AN152
  PDF, 169 Kb, Archivo publicado: jul 12, 2016
  Extracto del documento

  Application Note 152
  July 2016
  Power System Management Addressing
  Michael Jones Introduction
  The foundation of all PMBus applications, including LTCВ®
  Power System Management (PSM), is the ability for the
  PMBus master (system host) to communicate with all
  PMBus slaves (PSM controllers, PSM managers, PSM
  ВµModulesВ®, and PMBus monolithic devices) on the bus.
  Every slave on the bus must have a unique address that
  does not conflict with other devices.
  The bus master must also be able to communicate with
  PSM slaves in a few less than obvious situations: Address discovery Global actions Multiphase rails Invalid NVM Bus MUXes
  Device addressing is achieved with a combination of base
  registers plus external address select (ASEL) pins, as well
  as special global, rail, ARA, and other special addresses.
  This Application Note will present the fundamental design
  principles underlying the LTC PSM family, details on product
  family differences, as well practical examples and advice.
  Special cases, such as invalid NVM, will also be discussed.
  The benefit to you is a design that works on day one, and
  works even when things go wrong. For example, if you
  are writing to the NVM with LTpowerPlayв„ў, and power is …

• Descargar
  Linduino for Power System Management &mdash AN153
  PDF, 1.3 Mb, Archivo publicado: feb 24, 2016
  Extracto del documento

  Application Note 153
  July 2016
  Linduino for Power System Management
  Michael Jones
  INTRODUCTION LTC3880, and the industry standards for I2C/SMBus/
  PMBus. Most Power System Management designs follow a set
  and forget model. Setup and debug of Power System
  Management (PSM) devices is simple with LTpowerPlayВ®
  and when combined with a bulk programing solution, there
  is no need for firmware. However, many large systems
  require a Board Management Controller (BMC), begging
  the question: “What can firmware do for PSM?” Linduino PSM hardware consists of a Linduino (DC2026),
  and a shield to connect (DC2294) the I2C pins of the
  Linduino to an PMBus/SMBus/I2C Bus of a demo board
  or product board. The foundation of PSM firmware is PMBus; the foundation
  of PMBus is SMBus; and the foundation of SMBus is I2C.
  Building a BMC that adds value with PSM firmware requires
  some level of knowledge of each protocol, or a pre-existing
  library that frees the programmer from the details. For optimal learning, start with a DC2026 (Linduino),
  DC2294 (Shield), DC1962 (Power Stick), and a Total
  Phase Beagle (I2C Sniffer). This allows programming,
  debugging, and learning of controllers (LTC388X) and
  managers (LTC297X). The LinduinoВ® libraries handle each protocol layer, and …

• Descargar
  Fault Log Decoding with Linduino PSM &mdash AN155
  PDF, 230 Kb, Archivo publicado: enero 26, 2017
  Extracto del documento

  Application Note 155
  January 2017
  Fault Log Decoding with Linduino PSM
  Michael Jones Introduction
  LTC power system management devices are PMBus controlled point-of-load converters (LTCВ®388X) and power
  system managers (LTC297X). All LTC power system management (PSM) devices have a fault log that is written
  to EEPROM when there is a fault. Once the fault log is
  written, fault logs are no longer generated until they are
  re-enabled, typically after the data has been read back.
  LTpowerPlayВ® helps debug a system by reading the fault
  log, decoding it into human-readable format, displaying it
  and saving it to a file. A system with a board management
  controller (BMC), can also read the fault log from EEPROM
  and re-enable it. Firmware can store, transfer over a
  network and decode fault data read from a PSM device.
  The LinduinoВ® Sketchbook contains an example sketch
  that reads fault logs, along with the supporting libraries
  for PMBus and fault log decoding.
  This application note describes the basics of reading and
  decoding fault logs using Linduino.
  Hardware
  The hardware used for this application note is:
  1. DC2026 (Linduino) …

• Descargar
  In Flight Update with Linduino &mdash AN166
  PDF, 1.1 Mb, Archivo publicado: abr 10, 2017
  Extracto del documento

  Application Note 166
  April 2017
  In Flight Update with Linduino
  Michael Jones
  INTRODUCTION TO INFLIGHT UPDATE INFLIGHT UPDATE PROCESS Inflight Update is a method of modifying the stored settings of LTC Power System Management (PSM) devices,
  including application of the new settings, to a live system1 . The general dataflow of Infight Update is a simple linear
  progression: Inflight Update is a two-stage process: EEPROM is modified
  first, and then EEPROM is copied to RAM. During stage
  one, a Board Management Controller sends new settings
  directly to the EEPROM via PMBus while the devices are
  operating normally, without impacting operation. During
  stage two, all devices switch to the new configuration via
  a reset or a power cycle2 .
  Decoupling “programming settings” from “application of
  settings” allows the EEPROM programming mechanism
  to stage, validate, and recover from programming failure
  without interruption of delivered power. This minimizes
  system downtime because all rails are power cycled only
  once per update.
  Inflight Update solves several technical and business
  problems. Fast product development increases the probability of field problems. For example, the supervisors
  might require more margin to reduce false positives.
  An FPGA image update might require small changes to …

Notas de Diseño

• Descargar
  High Performance Single Phase DC/DC Controller with Power System Management &mdash DN517
  PDF, 126 Kb, Archivo publicado: jul 9, 2013
  Extracto del documento

  High Performance Single Phase DC/DC Controller with
  Power System Management – Design Note 517
  Yi Sun
  Introduction
  The LTC В®3883 is a single phase synchronous stepdown DC/DC controller featuring a PMBus interface
  for digital control and monitoring of key regulator
  parameters. It has integrated MOSFET gate drivers and
  can function either standalone or in a digitally managed
  system with other Linear Technology PMBus-enabled
  parts. The LTC3883 features:
  n 4.5V to 24V input voltage range and 0.5V to 5.5V
  output voltage range n ±0.5% output voltage accuracy over the full opera-tional temperature range of –40°C to 125°C n PMBus interface with programmable voltage, current limits, sequencing, margining, OV/UV thresholds, frequency synchronization and fault logging n Telemetry readback parameters including VIN, IIN,
  VOUT, IOUT, temperature and faults n External voltage dividers to set the chip address
  and default switching frequency and the output
  voltage n Input current sensing and inductor DCR autocalibration 1.8V/30A Single Phase Digital Power Supply
  with IIN Sense
  Figure 1 shows a 7V to 14V input, 1.8V/30A output
  application that features inductor DCR current sensing.
  To improve the accuracy of the DCR current sense, the
  L, LT, LTC, LTM, Linear Technology and the Linear logo are registered
  trademarks and LTpowerPlay is a trademark of Linear Technology Corporation.
  All other trademarks are the property of their respective owners. 5mО© VIN
  7V TO 14V 10ВµF D1 INTVCC …

Artículos

• Descargar
  DC/DC Controller Combines Digital Power System Management with Analog Control Loop for ±0.5% VOUT Accuracy &mdash LT Journal
  PDF, 3.1 Mb, Archivo publicado: oct 18, 2012
  Extracto del documento

  design features DC/DC Controller Combines Digital Power System
  Management with Analog Control Loop for
  В±0.5% VOUT Accuracy
  Hellmuth Witte The LTC3883/-1 is a versatile, single channel, PolyPhaseВ® capable, buck controller
  with digital power system management, high performance analog control loop,
  on-chip drivers, remote output voltage sensing and inductor temperature sensing.
  To minimize solution size and cost, the LTC3883/-1 features Linear’s patent pending
  auto-calibration routine to measure the DC resistance of the inductor to obtain
  accurate output current measurements when the cycle-by-cycle current is measured
  across the inductor (lossless DCR sensing). The LTC3883/-1 is based on the popular
  dual channel LTC3880/-1, described in the January 2012 issue of LT Journal.
  DIGITAL POWER MANAGEMENT In today’s data center systems the challenge is to “go green” by becoming as
  efficient as possible at all levels of the
  system—including the point of load, the
  board, rack and even installation levels. For instance, overall system power
  consumption can be reduced by routing
  the workflow to as few servers as possible,
  shutting down servers that are not needed
  at the time. The only way to do this and
  meet system performance targets (compute
  speed, data rate, etc.) is to implement a
  comprehensive digital power management system that monitors real-time
  power-consumption data at all levels. …

• Descargar
  High Performance Single Phase DC/DC Controller with Digital Power Management &mdash LT Journal
  PDF, 2.6 Mb, Archivo publicado: enero 17, 2013
  Extracto del documento

  design ideas High Performance Single Phase DC/DC Controller with
  Digital Power Management
  Yi Sun LTC3883 is a single phase
  synchronous step-down
  DC/DC controller featuring
  a PMBus interface for digital
  control and monitoring,
  and integrated MOSFET
  gate drivers. It can function
  either standalone or in a
  digitally managed system
  with other Linear Technology
  PMBus enabled parts. 5mО© VIN
  6V TO 24V 10ВµF
  100О© 1ВµF 100О© 10nF
  3О© 10nF
  VIN
  10k
  10k PMBus
  INTERFACE 10k
  10k
  10k
  10k В±0.5% output voltage accuracy over the …

Linea modelo

Clasificación del fabricante

• Power Management > Switching Regulator > Digitally Programmable Regulators
• Power Management > Switching Regulator > Step-Down (Buck) Regulators > External Power Switch Buck Controllers
• Monitor, Control and Protection > Digital Power System Management > DC/DC Regulator With Power System Management

Otros nombres:

LTC3883EUHTRPBF, LTC3883EUH TRPBF