Datasheet Linear Technology LTC3601IMSE#TRPBF — Ficha de datos

Fabricante	Linear Technology
Serie	LTC3601
Numero de parte	LTC3601IMSE#TRPBF

Regulador reductor síncrono monolítico de 1,5 A y 15 V

Hojas de datos

Vista previa y descarga

PDF, 421 Kb, Idioma: en, Archivo subido: sept 22, 2017, Páginas: 26
1.5A, 15V Monolithic Synchronous Step-Down Regulator

Extracto del documento

Precios

Embalaje

Package	MS-16E
Package Code	MSE
Package Index	05-08-1667

Paramétricos

Architecture	Constant Frequency Controlled On-Time Current Mode
Demo Boards	DC1353A,DC1454A
Design Tools	LTspice File,LTpowerCAD File
Export Control	no
Features	Burst Mode, Resistor Set Frequency, External Synchronization, Tracking, Power Good
Frequency	4000 kHz
Frequency Adjust Range	800kHz - 4MHz
Frequency Sync Range	800kHz - 4MHz
Integrated Inductor	no
Ishutdown	14 µA
Isupply	0.3 mA
Max Phases	1
Monolithic	yes
Number of Outputs	1
Operating Temperature Range	-40 to 85 °C
Output Current	1.5 A
Polyphase	no
Switch Current	2.2 A
Synchronous	yes
Topology	Buck
Vin Max	15 V
Vin Min	4 V
Vout Max	14.52 V
Vout Maximum	0.96Vin
Vout Min	0.6 V

Plan ecológico

RoHS

Obediente

Artículos

Descargar
Two Monolithic DC/DC Converters Take 3.6V-15V Inputs Down to 0.6V at High Frequency, Shrinking Battery-Powered Applications in Everything from Handhelds to Automobiles &mdash LT Journal
PDF, 829 Kb, Archivo publicado: jul 15, 2011
Extracto del documento
Two Monolithic DC/DC Converters Take 3.6VвЂ“15V Inputs
Down to 0.6V at High Frequency, Shrinking Battery-Powered
Applications in Everything from Handhelds to Automobiles
Mylien Tran and Theo Phillips When a relatively high voltage rail (12V) must be stepped down to a relatively low level
(3.3V, 1.8V), the traditional go-to converter is a DC/DC switching controller that drives
external MOSFETs. In many applications, replacing the typical controller-MOSFETdiode combo with a monolithic regulator would save space, design time and cost.
The problem is that 12V rails are too high for many monolithic buck converters, which
usually cannot be used with inputs above 6V. Additionally, switching losses typically
prevent practical operation above ~1MHz, precluding the use of the smallest possible
inductors, and in the end, negating some size advantages of a monolithic regulator.
The LTC3601 and LTC3604 are high
performance monolithic synchronous
step-down regulators capable of supplying up to 1.5A and 2.5A, respectively. They
operate from a wide input voltage range
of 3.6V to 15VвЂ”a range encompassing
battery chemistries found in handheld
devices, PCs, and automobiles. Their
unique constant frequency/controlled on
time architecture has a minimum on-time
of 20ns, ideal for high step-down ratio
applications that demand high switching
frequencies and fast transient response
while maintaining high efficiency. …

Linea modelo

Serie: LTC3601 (8)

LTC3601EMSE#PBF LTC3601EMSE#TRPBF LTC3601EUD#PBF LTC3601EUD#TRPBF LTC3601IMSE#PBF LTC3601IMSE#TRPBF LTC3601IUD#PBF LTC3601IUD#TRPBF

Clasificación del fabricante

Power Management > Switching Regulator > Step-Down (Buck) Regulators > Internal Power Switch Buck

Otros nombres:

LTC3601IMSETRPBF, LTC3601IMSE TRPBF