Datasheet Linear Technology LT8570IMS8E-1#TRPBF — Ficha de datos

Fabricante	Linear Technology
Serie	LT8570-1
Numero de parte	LT8570IMS8E-1#TRPBF

Boost / SEPIC / Inversor convertidor DC / DC con interruptor de 65V, arranque suave y sincronización

Hojas de datos

Vista previa y descarga

PDF, 906 Kb, Idioma: en, Archivo subido: sept 19, 2017, Páginas: 34
Boost/SEPIC/Inverting DC/DC Converter with 65V Switch, Soft-Start and Synchronization

Extracto del documento

Precios

Embalaje

Package	MS-8E
Package Code	MS8E
Package Index	05-08-1662

Paramétricos

Architecture	Constant Frequency Current Mode
Demo Boards	DC2297A-A,DC2297A-B
Design Tools	LTspice File,LTpowerCAD File
Export Control	no
Features	Resistor Set Frequency, External Synchronization, Soft Start
Frequency	1500 kHz
Frequency Adjust Range	200kHz - 1.5MHz
Frequency Sync Range	200kHz - 1.5MHz
Integrated Inductor	no
Ishutdown	1 µA
Isupply	1.2 mA
Max Phases	1
Monolithic	yes
Number of Outputs	1
Operating Temperature Range	-40 to 85 °C
Switch Current	0.375 A
Synchronous	no
Topology	Boost, Sepic, Inverting
Topology 1	Boost, Sepic, Inverting
Vin Max	40 V
Vin Min	2.55 V
Vin Min Startup	2.55 V
Vout Max	65 V
Vout Maximum	65V
Vout Min	1.204 V
Vref Accuracy Over Temp	1.3 %
Vswitch Max	65 V

Plan ecológico

RoHS

Obediente

Otras opciones

LT8570 LT8570

Artículos

Descargar
3mm × 3mm Monolithic DC/DC Boost/Inverting Converters with 65V Power Switches &mdash LT Journal
PDF, 230 Kb, Archivo publicado: jul 7, 2015
Extracto del documento
3mm Г— 3mm Monolithic DC/DC Boost/Inverting Converters
with 65V Power Switches
Joshua Moore The vast array of power supply rails required by modern electronics has popularized the
use of compact, easy-to-use monolithic DC/DC converters, such as the LT3580 boost/
inverting converter. The LT8580, LT8570, and LT8570-1 build on the success of the LT3580,
increasing the switch voltage to 65V and the input voltage to 40V, while retaining features
and pin compatibility. The LT8580 includes a 65V, 1A power switch, whereas the LT8570 and
LT8570-1 step the switch current limit down to 0.5A and 0.25A, respectively. Various current
options enable application optimizationвЂ”a monolithic converter sized for specific demands
can be smaller and more efficient than one designed for greater load currents. Optimized
sizing for current limit helps limit input and output current in the event of a short or failure.
In addition to the new options, all
devices in the familyвЂ”LTВ®3580, LT8580,
LT8570, and LT8570-1вЂ”are pin compatible. With a few simple component
changes, the same PCB layout can be
used for a range of applications, allowing fast turnaround design changes and
reuse. The LT8580, LT8570, and LT8570-1
retain the LT3580вЂ™s features such as single
resistor feedback, for both positive and
negative output voltages, overtemperature protection, frequency foldback, and an
external clock input pin. And, like the
LT3580, many features are user adjustable, including oscillator frequency,
soft-start, UVLO and output voltage. All …

Linea modelo

Serie: LT8570-1 (8)

LT8570EDD-1#PBF LT8570EDD-1#TRPBF LT8570EMS8E-1#PBF LT8570EMS8E-1#TRPBF LT8570IDD-1#PBF LT8570IDD-1#TRPBF LT8570IMS8E-1#PBF LT8570IMS8E-1#TRPBF

Clasificación del fabricante

Power Management > Switching Regulator > Inverting Regulators | SEPIC Regulators
Power Management > Switching Regulator > Step-Up (Boost) Regulators > Internal Power Switch Boost

Otros nombres:

LT8570IMS8E-1TRPBF, LT8570IMS8E-1 TRPBF, LT8570IMS8E1#TRPBF, LT8570IMS8E 1#TRPBF