Datasheet Linear Technology LT3579IUFD-1#TRPBF — Ficha de datos

Fabricante	Linear Technology
Serie	LT3579-1
Numero de parte	LT3579IUFD-1#TRPBF

6A Boost / Inverting DC / DC Converter con protección contra fallas

Hojas de datos

Descargar

PDF, 589 Kb, Archivo subido: sept 18, 2017

Extracto del documento

Precios

Embalaje

Package	4x5 QFN-20
Package Code	UFD
Package Index	05-08-1711

Paramétricos

Architecture	Constant Frequency Current Mode
Demo Boards	DC1514A,DC1661A
Design Tools	LTspice File,LTpowerCAD Model
Export Control	no
Features	Output Short Circuit Protection, PolyPhase, External Synchronization, Resistor Set Frequency
Frequency	2500 kHz
Frequency Adjust Range	200kHz - 2.5MHz
Frequency Sync Range	200kHz - 2.5MHz
Isupply	1.9 mA
Monolithic	yes
Number of Outputs	1
Operating Temperature Range	-40 to 85 °C
Over Voltage Protection	40 V
Switch Current	7.5 A
Synchronous	no
Topology	Boost, Inverting, Sepic
Topology 1	Boost, Inverting, Sepic
Vin Max	16 V
Vin Min	2.5 V
Vin Min Startup	2.5 V
Vout Max	42 V
Vout Maximum	42V
Vswitch Max	42 V

Plan ecológico

RoHS

Obediente

Otras opciones

LT3579

Artículos

Descargar
Two High Power Monolithic Switching Regulators Include Integrated 6A, 42V or 3.3A, 42V Power Switches &mdash LT Journal
PDF, 1.8 Mb, Archivo publicado: enero 18, 2011
Extracto del documento
Two High Power Monolithic Switching Regulators Include
Integrated 6A, 42V or 3.3A, 42V Power Switches,
Built-in Fault Protection and Operation up to 2.5MHz
Matthew Topp and Joshua Moore Power supply designers looking to shrink applications and simplify layout often turn to
monolithic switching regulators. Monolithics simplify power supply layout by including
the power switch on the dieвЂ”no external FETs or precision sense resistors are needed.
Monolithics can also operate at substantially higher switching frequencies than their
controller-only counterparts, thus reducing the size and number of external passive
components. The benefits of monolithic regulators are clear, but they traditionally have one
major limitation: as the required power level goes up, the likelihood of finding a suitable
monolithic regulator diminishes. Two new high power monolithics, the LT3579 and LT3581,
solve this problem by integrating 6A (42V) and 3.3A (42V) power switches, respectively.
The LT3579 and LT3581 are highly flexible parts and can be configured in
boost, SEPIC, inverting, or flyback configurations. They also offer many unique
performance and fault protection features. When configured as high power
boost converters, these parts can survive
output overloads with only a few additional external components. They can
also be configured to provide hot-plug
and reverse input voltage protection.
In addition, a novel master and slave
power switch design allows high voltage
charge pump circuits to be made with low
power dissipation and few components. …

Linea modelo

Serie: LT3579-1 (8)

LT3579EFE-1#PBF LT3579EFE-1#TRPBF LT3579EUFD-1#PBF LT3579EUFD-1#TRPBF LT3579IFE-1#PBF LT3579IFE-1#TRPBF LT3579IUFD-1#PBF LT3579IUFD-1#TRPBF

Clasificación del fabricante

Power Management > Switching Regulator > Inverting Regulators | LCD/CCD/OLED Bias | SEPIC Regulators | Flyback, Forward and Isolated Controllers
Power Management > Switching Regulator > Step-Up (Boost) Regulators > Internal Power Switch Boost

Otros nombres:

LT3579IUFD-1TRPBF, LT3579IUFD-1 TRPBF, LT3579IUFD1#TRPBF, LT3579IUFD 1#TRPBF