Datasheet Linear Technology LT1076HVCT-5#PBF — Ficha de datos

LT1076-5
5V Step-Down
Switching Regulator
FEATURES DESCRIPTION n The LT®1076-5 is a 2A fixed 5V output monolithic bipolar
switching regulator which requires only a few external parts
for normal operation. The power switch, all oscillator and
control circuitry, all current limit components, and an output
monitor are included on the chip. The topology is a classic
positive “buck” configuration but several design innovations allow this device to be used as a positive-to-negative
converter, a negative boost converter, and as a flyback converter. The switch output is specified to swing 40V below
ground, allowing the LT1076-5 to drive a tapped inductor
in the buck mode with output currents up to 4A. n Fixed 5V Output
2A On-Board Switch
100kHz Switching Frequency
2% Output Voltage Tolerance Over Temperature
Greatly Improved Dynamic Behavior
Available in Low Cost 5-and 7-Lead Packages
Only 9.5mA Quiescent Current
Operates Up to 60V Input APPLICATIONS n 5V Output Buck Converter
Tapped Inductor Buck Converter with 4A Output at
5V
Positive-to-Negative Converter The LT1076-5 uses a true analog multiplier in the feedback
loop. This makes the device respond nearly instantaneously …