Datasheet Linear Technology LTC2644-10 — Ficha de datos

Hojas de datos

Precios

Otras opciones

LTC2644-12 LTC2644-8

Notas de Diseño

• Descargar
  Accurate, Fast Settling Analog Voltages from Digital PWM Signals &mdash DN538
  PDF, 191 Kb, Archivo publicado: marzo 17, 2015
  Extracto del documento

  Accurate, Fast Settling Analog Voltages from Digital PWM
  Signals
  Design Note 538
  Mark Thoren and Chad Steward
  Introduction
  Pulse width modulation (PWM) is a common technique
  for generating analog voltages from a digital device such
  as a microcontroller or FPGA. Most microcontrollers have
  dedicated PWM generation peripherals built in, and it only
  takes a few lines of RTL code to generate a PWM signal
  from an FPGA. This is a simple, practical technique if
  the analog signal’s performance requirements are not
  too stringent, as only one output pin is required and the
  code overhead is very low when compared to a digitalto-analog converter (DAC) with an SPI or I2C interface.
  FigureВ 1 shows a typical application, with a digital output
  pin that is filtered to produce an analog voltage.
  20MHz
  CLOCK 12-BIT
  PWM
  ВµC 5kHz
  PWM at a constant value, which may present a problem if the
  processor is to be put into a low power shutdown state.
  PWM-to-Analog Improved? …

Clasificación del fabricante

• Data Conversion > Digital-to-Analog Converters (DAC) > Special Function DACs | Voltage Output DACs | Unipolar Digital-to-Analog Converters (DAC)
• Space & Harsh Environment > Extended Temperature Plastic (H & MP) > Extended Temperature (H & MP) DACs